Description
The Blux W125 is a wall light from our Blux System range: a deep dome shade on a slim arm, held out from a round wall plate. A ribbed collar crowns the shade and a round knuckle joins it to the arm, a tidy, workmanlike shape that has a quiet presence on a plain wall. It stands 22.5cm tall. It takes one E27 bulb of up to 10W, which is sold separately and gives the fitting its light, so you can choose the brightness and the warmth of light yourself. It comes in Black, Red, Beige, Brass or Copper, so you can pick a dark accent, a bright note of colour or a warm metal to sit with the rest of the room.
It suits a bedroom, a dining room or a living room. Either side of a bed, a pair gives each of you a reading light without a lamp on the bedside table; in a dining room it can light a sideboard or a favourite picture; in a living room it sits well beside an armchair or over a side table. It is rated IP20, so it is for dry rooms only. It is not dimmable, so it belongs on an ordinary switch rather than a dimmer, and the bulb you choose sets how bright it is.
It runs on mains power and is wired in by a qualified electrician. It is a Class I fitting, so it is earthed and needs an earth connection at the wall. The round wall plate gives it a neat base, and the ribbed collar and rounded knuckle carry the same simple, engineered look in every finish we offer. When you order, choose the finish that suits your walls: the shape stays the same whichever you pick, so a pair in different finishes still reads as a matching set. Our photographs show the black version.
Specification
| Finish |
Black, Red, Beige, Brass & Copper |
| Height |
22.5cm |
| Projection |
125cm |
| Light Source |
1 x E27 (bulbs not included) |
| Max Bulb Wattage |
10W per bulb |
| Dimmable |
No |
| Power |
Mains, wired in by an electrician |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Lead time |
Made to order, usually delivered in 4 to 8 weeks |
Frequently Asked
Does the Blux W125 come with a bulb?
No. It takes one E27 bulb of up to 10W, which is sold separately, so you can choose the brightness and warmth of light you prefer.
Can I use the Blux W125 with a dimmer switch?
No. This wall light is not dimmable, so it should go on an ordinary on and off switch rather than a dimmer.
Can I fit this wall light in a bathroom?
No. It is rated IP20, so it is for dry rooms only, such as a bedroom, a dining room or a living room.
What finishes does the Blux W125 come in?
It comes in Black, Red, Beige, Brass or Copper, and the dome shade, ribbed collar and round wall plate are the same shape in every finish.
How is the Blux W125 installed?
It runs on mains power and is wired in by a qualified electrician. It is a Class I fitting, so it needs an earth connection.
How long will it take to arrive?
It is made to order for you, so it is usually delivered in 4 to 8 weeks.