Description
The Bloom is a single-globe ceiling light that mounts a round glass shade close under the ceiling on a slim brass cap. The globe is built in two layers: a ribbed, amber-tinted outer that catches the light warmly and a white acid-etched inner that turns the E27 lamp into a soft, even ball rather than a bright point. Lit, the shade glows warm at the top and pours a diffused pool downward through the open underside; unlit, it hangs as a quiet textured sphere against the ceiling.
This is the 220mm size in brass, sitting only 215mm below the ceiling, so it reads as a semi-flush globe for a room without the drop of a hanging pendant. The brass cap adds a warm metal edge above the glass, and the compact height suits a hallway, a landing, a bedroom or a bathroom lobby where a pendant would hang too low. One globe gives a broad, contained wash of light that lights the space evenly rather than aiming a beam.
The cap and frame are powder-painted or plated metal in brass, and the shade is blown glass with the ribbed amber outer over the white etched inner. It takes a single E27 screw-cap bulb up to 42W, which is not included, so we would fit an E27 lamp to suit; the standard cap means a wide choice of LED bulbs and colour temperatures, and you set the brightness and tone. It carries an IP20 rating for indoor use.
Specification
| Number of lights |
1 |
| Light source |
1 x E27 (max 42W each, bulb not included) |
| Colour temperature |
Depends on bulb fitted |
| Diameter |
220mm |
| Height / Drop |
215mm |
| IP rating |
IP20 (indoor) |
| Dimmable |
Depends on bulb fitted |
| Frame / Structure finish |
Brass plated metal |
| Diffuser / Glass |
Ribbed amber outer glass over white acid-etched blown glass inner |
| Materials |
Powder painted or plated metal ceiling cap and frame, blown glass shade |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Bloom give?
A soft, broad wash. The white acid-etched inner glass diffuses the E27 lamp into an even ball, and the open underside pours a diffused pool downward while the ribbed amber outer glows warm at the top, lighting a room without glare.
What bulb does it take and is one included?
It uses a single E27 screw-cap bulb up to 42W. A bulb is not included, so we would fit an E27 lamp to suit; the standard cap means a wide choice of LED bulbs and colour temperatures.
Is it dimmable?
Dimming depends on the E27 bulb fitted. With a dimmable E27 lamp on a compatible dimmer the light can be lowered; the fitting itself has no integrated driver.
How big is it and where does it suit?
The glass globe is 220mm across and sits 215mm below the ceiling as a semi-flush fitting. The low height suits a hallway, a landing, a bedroom or a lobby where a hanging pendant would drop too far.