Description
A slim horizontal bar carries three E27 lampholders in a row, plated and polished to a bright chrome that catches whatever light is already in the room. The bar runs 95cm end to end, so each holder sits far enough from its neighbour to take a shade of your own choosing without crowding. Each drop adjusts on its own, from close under the ceiling down to a maximum of 210cm, and every holder takes a screw-fit lamp, with a GLS LED globe the sensible choice.
We reach for a linear pendant like this over a long dining table, a kitchen island or a run of worktop, where a single central fitting would leave the far ends of the table dim. It also earns its keep above a breakfast bar or a hall console. Because every drop is set separately, you can hang the lamps dead level or step them at staggered heights, which works nicely in a room with a sloping or lofty ceiling. Keep it to dry rooms indoors; a bathroom or a covered porch calls for something sealed.
The plating is buffed to a mirror sheen that sits well with handles, taps and mirror frames in the same finish. Polished chrome does show fingerprints and dust, so give it an occasional buff with a clean dry duster, and leave household sprays and cream cleaners in the cupboard, as they haze the surface. It carries a one year warranty. We stock the same bar in antique brass and satin nickel, and with a longer flex for taller rooms, and the range also runs to flush and semi-flush fittings if a pendant would hang too low. Shades and lamps are chosen separately and are not included.
Specification
| Colour |
Polished Chrome |
| Ceiling Mountable |
Yes |
| Weight |
2.70KG |
| Length |
950mm |
| Width |
100mm |
| Minimum Drop (mm) |
130mm |
| Maximum Drop (mm) |
2100mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
Frequently Asked
What lamps does it need?
Three E27 screw-fit lamps, up to 20W each. A GLS A60 LED is the recommended shape, and lamps are supplied separately.
Can the lights be dimmed?
Yes, provided you fit dimmable lamps and pair them with a compatible dimmer switch.
How long is the bar and how far will it drop?
The bar measures 950mm long by 100mm wide, and each pendant drop can be set anywhere between 130mm and 2100mm.
What sort of shades will it take?
The holders are universal E27 fittings, so they suit a wide selection of shades sized for a screw-fit lampholder. Choose three matching shades for a tidy run, or mix them if you prefer.
How should the chrome be cleaned?
Switch the power off at the wall and let the lamps go cold, then wipe the plating with a soft dry cloth. Avoid polishes, solvents and abrasive creams.
Is it suitable for a bathroom?
No. It is rated IP20, which means dry indoor rooms only, away from splashes and steam.