Description
A linear bar in antique brass carrying three E27 lampholders in a row, this one is built to be finished with shades of your own choosing. The bar measures roughly 95cm end to end, so the lampholders sit well apart rather than bunched together, and the suspension can be shortened or let down to a maximum drop of 210cm. Left bare it reads as a simple run of holders and cable; dressed with shades it becomes as plain or as decorative as you like.
This is the fitting we reach for over a long dining table, a kitchen island or a run of worktop, where three separate pools of light do more good than one central pendant. It also works well above a console or a wide breakfast bar. Because the holders are the universal type, a vast selection of shades will fit, which makes it a sensible choice if you already have shades in mind or want to change them later. With suitable lamps and a compatible dimmer in the circuit, the light can be dialled down for evenings.
The metalwork wears a warm antique brass tone that sits comfortably with older woodwork, painted cabinetry and aged mirrors, and it takes on brass or bronze shade frames particularly well. To keep it looking right, run a dry duster along the bar now and then and lift any marks with a barely damp cloth, working with the power off and the lamps cold. Nothing abrasive and no sprays, as these will dull the finish. It carries a one year warranty. We stock the same linear pendant in polished chrome and satin nickel, in this drop and in a longer one, and the antique brass is offered in the longer drop too if your ceiling asks for it. Shades and lamps are chosen separately.
Specification
| Colour |
Antique Brass |
| Ceiling Mountable |
Yes |
| Weight |
2.70KG |
| Length |
950mm |
| Width |
100mm |
| Minimum Drop (mm) |
130mm |
| Maximum Drop (mm) |
2100mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
Frequently Asked
What lamps does it take?
Three E27 lamps, each up to 20W. LED GLS A60 lamps are the recommended choice and give an even spread through most shades.
Are shades included?
No. The lampholders are the universal pattern, so you choose the shades to suit your room and fit them yourself.
How short can the drop be?
It adjusts from a minimum drop of 130mm up to 2100mm, so it can hang close under a low ceiling or long over a stairwell table.
Can it be dimmed?
Yes, provided you fit dimmable lamps and a dimmer switch matched to them.
How wide is the fitting?
The bar is about 950mm long and 100mm wide, which suits tables from around 1.2m upwards.
Is it suitable for a bathroom?
No. It is rated for dry rooms only, so keep it to hallways, kitchens, dining rooms and bedrooms.