Description
Three E27 sockets sit on a round plate that hangs close to the ceiling, each on its own short drop, so the fitting reads as a single piece rather than a cluster of pendants. The plate measures 24cm across, which keeps it modest above a table or in a hallway. Polished chrome catches the light and keeps the frame looking light on the eye. Every socket is made to take a shade, and the choice that will fit is wide, so you set the character of the light yourself.
We would hang this where a pendant would sit too low: a landing, a small bedroom, or a galley kitchen with little headroom. Splitting the light across the plate spreads it more evenly than a single central lamp, which helps in long hallways and awkward corners. It will dim, given lamps that dim and a compatible dimmer on the circuit. We reach for LED GLS lamps here, warm white in bedrooms and something crisper where you are reading or cooking. It needs an earthed supply, and it should stay clear of steam and spray, so bathrooms are not for it.
Metalwork is finished in polished chrome across the plate, the drops and the lamp holders. A dry microfibre cloth now and then keeps the shine even; sprays and scouring pads will dull it, so leave them in the cupboard. It carries a one year warranty. We stock the same idea in white, and a wider five lamp version in polished chrome if the room wants more light; the range also runs to semi flush fittings and linear pendants on a bar, with antique brass and satin nickel among the finishes. Lamps and shades are not included.
Specification
| Colour |
Polished Chrome |
| Ceiling Mountable |
Yes |
| Weight |
0.73KG |
| Diameter |
240mm |
| Height |
180mm |
| Materials Used |
Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How big is the fitting?
The plate is 240mm in diameter and the fitting stands 180mm deep, so it sits tight to the ceiling while still allowing room for shades.
Which lamps does it take?
It takes three E27 lamps, up to 20W each. LED GLS (A60) lamps are the recommended choice.
Can I fit my own shades?
Yes. Each E27 holder is made to accept a wide selection of shades, chosen and bought separately to suit the room.
Is it dimmable?
Yes, provided you use dimmable lamps and a dimmer switch compatible with them.
How should I clean the chrome?
Switch the light off at the wall and let the lamps go cold, then wipe the metal with a dry microfibre cloth. Avoid cleaning sprays and anything abrasive.
Can it go in a bathroom?
No. It is rated IP20 and needs a dry indoor room away from steam and splashing.