Description
Three E14 candle lamps sit close together on one satin nickel stand, with an inline switch on the flex so you are not reaching behind furniture every night. It comes without shades, and that is rather the point: the fabric, the shape and the depth are yours to pick, and the same base reads quite differently under little pleated candle shades than it does under plain drums. Fit dimmable lamps, add a compatible dimmer, and it will dim.
At 24cm across and 52cm tall it is a small lamp that still holds its ground, which suits a hallway console, a dressing table or a generous bedside where a single shaded lamp would look mean. Because the light is spread across the holders rather than gathered under one shade, the glow lifts a whole corner instead of pooling, and it earns its place as the low, warm layer in a sitting room lit mostly from the ceiling. It also does well on a wide sideboard, where you want light on the surface without a pendant hanging over it. We stock E14 candle lamps alongside it, and we would reach for warm white LEDs here, which keep the heat down inside close-fitting shades.
Satin nickel is a soft, low-sheen metal finish, so smudges and dust are far less obvious on it than they are on bright chrome. To keep it that way, unplug the lamp, run a barely damp cloth over the metal and dry it at once; polishes and creams will dull the sheen, so leave them in the cupboard. Nickel sits happily with brushed steel kitchen fittings and with warm woods, which is why it moves so easily between rooms. It carries a one year warranty. Shades and lamps are chosen to suit and are not included.
Specification
| Colour |
Satin Nickel |
| Weight |
2.45KG |
| Diameter |
240mm |
| Height |
520mm |
| Materials Used |
Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
100-240V~50/60Hz |
| Switch |
Yes - Inline Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Base Dimensions (mm) |
D:180mm, H:40mm |
| Shade Included |
No |
| Number of Shades |
1 |
| Base Material |
Iron |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How many shades will I need?
Three, one for each holder. Keep them small and slim so they clear one another on a base measuring 240mm across.
What lamps does it take?
Three E14 candle lamps, up to 20W each. An LED C35 candle is the sensible choice and the one we would fit.
Can it be dimmed?
Yes, provided the lamps are dimmable and you use a compatible dimmer. No dimmer is supplied with the lamp.
How is it switched?
By an inline switch on the flex, so you can operate it from the tabletop rather than at the socket.
How tall is it and how heavy?
It stands 520mm tall with a 240mm diameter, and weighs 2.45kg, so it sits steadily on a console or bedside table.
Is it suitable for a bathroom?
No. It is rated IP20 and belongs in dry rooms such as bedrooms, halls and living rooms.