Description
Three slim arms rise from a round base and end in small candle holders, grouped close so the light pools at the centre of the lamp rather than scattering. The base is 24cm across and the piece stands 52cm to the top of the holders, tall enough to carry a shade with some depth. An inline switch on the flex means you turn it on at hand height rather than groping behind a table. It takes three E14 candle lamps, and we would fit LED candles.
It suits a bedside where a ceiling light is too much after dark, a hallway table, or a pair on a long sideboard. Since it comes without a shade, it is a good choice if you already have a shade you like, or you want to pick the fabric and shape yourself; we often point people here when the shade is the part they care about most. Polished nickel reads cooler and sharper than brass, and it sits comfortably with grey, white and pale wood. Dimming is possible with dimmable lamps and a separate dimmer.
The frame carries a polished nickel finish throughout, bright and even, and the lamp is double insulated, so no earth connection is needed. Nickel shows fingerprints more readily than an aged finish, so a wipe with a dry soft cloth now and then keeps it looking crisp; skip metal polishes and scouring pads, which will dull the surface. Keep it to dry rooms, well away from basins and splashes. It carries a one year warranty. Left bare, the arms have a spare, slightly industrial look; under a wide drum or small clip shades it turns into something softer. Shade and lamps are bought separately.
Specification
| Colour |
Polished Nickel |
| Weight |
2.45KG |
| Diameter |
240mm |
| Height |
520mm |
| Materials Used |
Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Yes - Inline Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Base Dimensions (mm) |
D:180mm, H:40mm |
| Shade Included |
No |
| Number of Shades |
1 |
| Base Material |
Iron |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Does a shade come with this lamp?
No, it is sold as a base only. The three E14 holders take clip shades or small candle shades, or you can sit one wider shade over the group if your shade has a suitable fitting.
What lamps should I use?
LED candle lamps with an E14 cap, C35 shape, up to 20W each. Three are needed to fill all the holders.
How is it switched?
There is an inline switch on the flex, so you operate it from the cable rather than at the lamp itself.
Can it be dimmed?
Yes, provided you fit dimmable lamps and use a compatible dimmer. No dimmer is supplied with the lamp.
How big is it and how heavy?
It is 240mm in diameter and 520mm tall, and weighs 2.45kg, so it sits steadily on a side table without a wide footprint.
How should I clean the nickel?
A dry soft cloth is all it needs. Avoid polishes, creams and anything abrasive, as these can mark the polished surface.