ATL4 GU10 Track Light - Black

The ATL4 GU10-B is an adjustable track head that takes a single GU10 PAR16 lamp and runs at 220-240V AC, drawing up to 10W. It mounts onto a lighting track, the format US buyers know as track lighting, letting you slot the head onto a live rail and angle the beam toward whatever you want lit. Because it carries a GU10 lamp rather than an integrated LED module, the light output and colour temperature follow the bulb you fit, and the head tilts and rotates so the throw can be aimed at a picture, a shelf or a worktop.

The fitting suits retail displays, galleries, kitchens and living spaces where the lighting needs to pick out specific objects rather than wash a whole room. Each head delivers a focused pool of light, so coverage is best judged by how many heads you space along the run and where each one is aimed, not by a single floor area. Run several along a track to graze a feature wall or light a sequence of products, and reposition or add heads later as the layout changes, since the track carries the supply and the heads simply clip on.

The body is aluminium alloy in a black finish, weighing 234g, which keeps the head light enough to reposition by hand once unlocked. The rating is IP20, so it is for dry indoor locations only and should be kept clear of bathrooms, damp areas and any outdoor position. No driver is included or needed for a mains-voltage GU10 lamp; you supply the GU10 bulb to suit the brightness and tone you want. The ATL4 head fits the wider Atl4 track range, so heads and track sections can be combined to build the run.

What is track lighting and how does it work?

Track lighting uses a powered rail mounted to the ceiling or wall, with individual heads that clip onto it and draw power from the track. The ATL4 GU10-B is one such head, taking a GU10 lamp and tilting so you can aim each light independently. It lets you build a flexible lit layout from a single supply point.

What track does the ATL4 head fit?

The ATL4 GU10-B is designed to clip onto the matching Atl4 track. Check whether your run is single-circuit or three-phase before ordering, as the head and track must share the same circuit type. The heads and track sections in the range are made to combine into a continuous run.

Can I add or move heads as the layout changes?

Yes. Once unlocked, each head slides along the live track and clips out, so you can reposition it or add further heads at any point along the run. This makes it straightforward to re-aim the lighting if a display or furniture arrangement changes later.

How do I clean the track head?

Switch off the supply and let the head cool, then wipe the aluminium body with a soft dry or slightly damp cloth. Avoid solvents and abrasive cleaners, which can mark the black finish. As an IP20 fitting it must stay dry, so never use a wet cloth or run it under water.