ATL2 GU10 Track Light Adjustable Spotlight - Black

The ATL2 GU10-B is a track-mounted spotlight head that takes a single GU10 (PAR16) lamp rated up to 10W, running from a 220-240V AC supply. American buyers will recognise the format as track lighting, the wall-or-ceiling rail system that lets several heads share one circuit. Because the lamp is a standard GU10 rather than an integrated source, the beam angle and colour temperature follow whichever GU10 lamp you fit, so the same head can throw a tight accent beam or a wider wash depending on the bulb chosen.

Track lighting suits spaces where the lighting needs to move as the room does, which is why it works so well over kitchen worktops, along a hallway, across a retail display or above artwork and shelving. Each head clips onto the rail and slides along it, then pivots and tilts so you can aim the light precisely at a picture, a counter or a feature wall. Coverage is directional rather than even room fill, so the throw depends on the GU10 lamp you pair with it. Run several ATL2 heads on one length of track and you can light a whole zone, re-angling individual heads later if the layout changes. This is an IP20 fitting for dry indoor rooms only, so keep it clear of bathrooms, porches and any outdoor or damp location.

The body is aluminium alloy in a black finish, weighing 286g, which keeps it light enough to sit on the rail without strain. It mounts onto compatible track and draws power through the rail, so no separate driver sits at the fitting. The GU10 lamp is replaceable, meaning you can swap colour temperature or output without changing the head. We supply the ATL2 in the wider Atl2 track range, so heads and matching track sections can be combined to build a layout that fits the room.

What is track lighting and how does it work?

Track lighting is a powered rail fixed to the ceiling or wall, onto which individual spotlight heads clip and draw their supply. The ATL2 head slides along the rail and locks into position, so you can space several heads where you need them. It removes the need for a separate junction box at each light point.

What track does the ATL2 GU10 fit?

The ATL2 is a track-mounted head designed to clip onto compatible track rail and run from a 220-240V AC supply. Check whether your installation uses single-circuit or three-phase track before mixing components, as heads and adaptors must match the track type. Pairing it with track from the same Atl2 range keeps the fit consistent.

Can I add or move the heads after installation?

Yes, that is the main benefit of a track system. Each ATL2 head slides along the rail and can be re-angled or repositioned, so you can change the lighting as a room layout changes. You can also add further heads onto the same length of track up to its rated load.

Can I change the colour temperature or beam?

Yes. The ATL2 takes a standard GU10 (PAR16) lamp up to 10W, so the colour temperature and beam angle follow the bulb you fit rather than being fixed in the head. Swap in a warmer or cooler GU10, or a narrower beam, whenever you want a different effect.