ATL2 GU10 Track Light Adjustable Head - White

The ATL2 GU10-W is a single track head that fits onto a track lighting system, letting you point a focused beam exactly where it is needed. It takes a GU10 (PAR16) bulb up to 10W and runs on a standard 220-240V AC supply. Known in the US as a track light, this head clips onto the powered rail and can be repositioned along its length, so the lighting layout is set by where you place each head rather than fixed wiring. The adjustable body tilts and rotates to aim the light at a particular surface or object.

Track lighting suits kitchens, hallways, retail displays and home offices where the lit areas may change over time. Heads can be slid along the track and angled to graze a wall, pick out artwork or wash a worktop, and more heads can be added as the layout develops. Because this is directional spot lighting rather than ambient room lighting, think of its coverage as a controllable pool of light over a defined zone rather than even fill across a whole room. Mount the track at ceiling height and space the heads to cover the points you want lit. As an IP20 fitting it is for dry indoor rooms only, so keep it clear of bathrooms, porches and any outdoor location.

The head is built from aluminium alloy in a white finish and weighs 286g, light enough to carry several on one run of track. It connects to the track via the mounting adaptor and draws power through the rail, so no separate driver is needed for the head itself. The GU10 lamp is user-replaceable, which makes it simple to change the colour temperature or output by swapping bulbs. Check the track type before ordering, as heads are matched to single or three-phase systems.

What is track lighting and how does it work?

Track lighting is a powered rail fixed to the ceiling or wall onto which individual heads, like the ATL2, are clipped. Power runs through the track itself, so each head draws its supply from wherever it sits along the rail. This lets you build a row of adjustable spots without separate wiring to each fitting.

Can I add or move the heads as my layout changes?

Yes. The ATL2 head slides along the track and locks in place, so you can reposition it whenever the room or display changes. You can also add further heads to the same run as long as the track is rated for the combined load.

What track does this head fit?

It connects through a track adaptor and is matched to a specific track system, available in single and three-phase versions. Confirm whether your track is single or three-phase before ordering so the head seats and powers correctly.

How do I clean the fitting?

Switch off the power and let the bulb cool, then wipe the aluminium body with a soft dry or slightly damp cloth. Avoid solvents and abrasive cleaners, which can mark the white finish. Take care not to knock the head out of its set aiming angle while cleaning.