Atl1 30W LED Track Light 60 deg Warm White - White

The Atl1 is a 30W LED track light that fixes onto a lighting track to direct a focused beam exactly where it is wanted. It draws 30W to deliver 2850 lumens at an efficiency of 95 lm/W, with a 3000K warm white tone and a 60 degree beam angle that gives a controlled pool of light rather than a broad wash. American buyers will know this format as track lighting, the head-on-rail system used to spotlight zones along a single run. Colour rendering sits at Ra 90, so colours, finishes and displayed goods read accurately under the beam.

Track lighting suits retail displays, galleries, kitchens and living spaces where individual features need picking out, such as artwork, a worktop or a shelving bay. Because each head can be slid and angled along the track, the layout can be reworked as a display or room changes without new wiring. The 60 degree beam concentrates output into a defined spot, so this head is best read as accent and feature lighting rather than even ambient room fill; aim several heads along a run to cover a counter, a wall of frames or a kitchen island. As an IP20 fitting it is for dry indoor positions only and should be kept clear of bathrooms, damp areas and any outdoor location.

The body is aluminium alloy in a white finish, weighing 790g, with a rated lifespan of 50,000 hours. It runs on 220-240V AC mains through the track and is not dimmable, so it is best paired with circuits where a fixed output is wanted. Mounting is track mounted, clipping and locking onto the conductors of a compatible lighting track. The white finish keeps the head discreet against a white ceiling or rail. The Atl1 sits within a wider track range at Niori, so heads and track components can be combined to build a single coordinated run.

What is track lighting and how does it work?

Track lighting is a system where individual light heads clip onto a powered rail rather than each being wired in separately. The Atl1 head locks onto the track and takes its 220-240V AC supply from the conductors inside it. This lets several heads share one circuit along a single run.

What track does the Atl1 fit and can I add or move heads later?

The Atl1 is a track mounted head designed for a compatible lighting track. Heads slide along the rail and lock into place, so you can reposition, add or remove them as a display or room layout changes without any rewiring. Check the head matches your track type, single or three-phase, before installing.

How bright is it and what beam does it give?

It produces 2850 lumens from 30W at 95 lm/W, with a tight 60 degree beam. That makes it an accent and feature light that throws a defined spot rather than lighting a whole room evenly. Run several heads along a track to cover a worktop, shelving bay or wall of artwork.

How do I clean the Atl1?

Switch off the power and let the head cool, then wipe the aluminium alloy body and the lens with a soft, dry or slightly damp cloth. Avoid solvents or abrasive cleaners, which can mark the white finish. Take care not to knock the head out of its set angle while cleaning.