Atl1 18W LED Track Light 60 deg Beam Cool White - White

The Atl1 is an 18W LED track light head that clips onto a track and aims a focused pool of light wherever it is needed. It draws 220-240V AC and puts out 1800 lumens at a 4000K cool white tone, with a 60 degree beam that gives a defined circle of light rather than a broad wash. Americans tend to call this style of fitting track lighting too, so the terminology carries across both markets, and at an efficiency of 100 lm/W it produces a useful output for the power it uses. The Ra 90 colour rendering keeps surfaces, stock and artwork looking true under the beam.

Track heads like this earn their place where light needs to be pointed at something specific rather than spread across a whole room. Think retail displays, gallery walls, kitchen worktops or a feature wall in a living space, where several heads can be spaced along a run and each angled independently. The 60 degree beam throws a moderately tight cone, so mounting height and spacing decide how much of a surface each head covers; closer heads give an even line of accent light, wider spacing gives separate highlights. Because heads slide and lock anywhere along the track, the layout can be reworked as a display or room arrangement changes without any rewiring.

The body is aluminium alloy in a white finish, weighing 530g, and it mounts directly onto the track using the bracket designed for that system. The head carries an IP20 rating, so it is for dry indoor use only and should be kept away from bathrooms, damp areas and anywhere outdoors. It is not dimmable, and the rated lifespan is 50,000 hours. We stock the Atl1 across several outputs and tones, so a single track run can mix heads to suit different tasks.

What is track lighting and how does this head work?

Track lighting is a system where individual light heads attach to a continuous powered rail rather than each being wired into a fixed point. This Atl1 head clips onto the track, draws its 18W supply through the rail, and can be slid along and angled to aim its 60 degree beam at whatever you want to light. It gives directed accent light rather than general room illumination.

What track does the Atl1 fit and can I add more heads later?

The head is built for a three-phase track system and locks onto the rail with its mounting bracket. You can add, remove or reposition heads anywhere along a powered run at any time, so the layout adapts as a display or room arrangement changes. This makes it straightforward to build up a lighting scheme in stages.

Can I use this fitting outdoors or in a bathroom?

No. The Atl1 carries an IP20 rating, which means it is suitable for dry indoor use only. Keep it clear of bathrooms, damp spaces, porches and any outdoor location, as it offers no protection against moisture or dust.

How do I clean and maintain the track head?

Switch off the track and let the head cool, then wipe the white aluminium body and the lens with a soft, dry or slightly damp cloth. Avoid solvents or abrasive cleaners, which can mark the finish. A quick wipe now and then keeps the lens clear so the full 1800 lumen output reaches the surface you are lighting.