Astim 600x100 12W Surface Downlight IP44 - Chrome

The Astim is a surface-mounted LED downlight that puts out 1010 lumens from a 12W draw, running at 84 lm/W on 220-240V AC mains. The light sits at 4000K neutral white, a clean balanced tone that reads as natural daylight without the blue cast of cooler temperatures. A wide asymmetric spread of 120 degrees by 105 degrees pushes the output across the area below rather than down a single tight cone, which suits a long rectangular body measuring 600 x 100 mm. North American buyers tend to file fittings like this under surface-mount can lighting, though the slim linear form factor here sits closer to a strip than a round can.

Because the beam is broad and the lumen package modest, the Astim covers around 3 m² at general lighting levels, making it a sensible choice for a single zone such as the area over a vanity, a shower lobby or a compact ensuite. The IP44 rating means it copes with splashes and steam, so it is at home in bathroom zones and under sheltered cover such as a porch or carport soffit. It is not built for fully exposed positions, direct water jets or submersion, so keep it clear of open weather and standing water. On a standard ceiling height the wide throw helps wash the surface evenly rather than spotlighting one point.

Construction is aluminium alloy in a chrome finish, with the metal body helping draw heat away from the LED to support the rated 25,000 hour lifespan. The fitting surface-mounts directly to the ceiling, so no cut-out is needed, and at 234 g it is light enough for quick fixing. The integrated LED is not replaceable and the unit is non-dimmable, running at full output on standard mains. Colour rendering sits at Ra 80, fair for everyday tasks. The Astim range includes further sizes and wattages for matching a run of fittings across a space.

Can the Astim downlight be used in a bathroom?

Yes, it carries an IP44 rating, which makes it suitable for bathroom zones where splashes and steam are present. It is fine in a shower lobby or over a vanity, but it should not be fitted in a position exposed to direct water jets or open weather.

Does this fitting need a ceiling cut-out?

No, the Astim is surface-mounted, so it fixes directly onto the ceiling rather than recessing into it. There is no cut-out hole to measure or cut, which makes it a good option for ceilings where you cannot recess a fitting.

Is the Astim downlight dimmable?

No, this model is non-dimmable and runs at full 1010 lumen output on standard 220-240V AC mains. It is best paired with a standard on/off switch rather than a dimmer circuit.

How do I clean the fitting?

Wipe the chrome surface with a soft, dry or slightly damp cloth once the light is switched off and cool. Avoid abrasive pads or solvent cleaners, as these can mark the finish over time.