Description
The Aspen C17A is a compact ceiling light: a neat cylinder 22cm tall and 17cm across, with a slotted ring where it meets the ceiling and an open underside the light falls from. It comes with a choice of light source. The integrated LED version needs no bulb and gives 1350 lumens of warm 2700K light from 16.6W, with a CRI of 90, so colours and skin tones look natural. The E27 bulb version takes one E27 bulb of up to 15W, and the bulb is not included, so you choose it yourself. There is also a choice of a phase-cut dimmable version, which needs a compatible dimmer, or a non-dimmable version.
Rated IP20, it is for dry indoor rooms only. It sits close to the ceiling, which makes it a good choice where a pendant would hang too low: over a dining table, along a hallway or landing, in a living room or in a bedroom. Because it is compact, it works well in a row, with several spaced over a long table or down a corridor. It runs on 230V mains power and is wired in by a qualified electrician.
The design is by Werner Aisslinger. Every finish is matt, and you can choose from Aqua (matt) RAL 5024, Black (matt) RAL 7021, Brass (matt), Brown (matt) RAL 8025, Burgundy (matt) RAL 3011, Concrete (matt) RAL 7033, Forest (matt) RAL 6035, Grey (matt) RAL 7037, Horizon (matt) RAL 5023, Khaki (matt) RAL 7008, Lemon (matt) RAL 1018, Limestone (matt) RAL 7035, Mango (matt) RAL 1034, Mustard (matt) RAL 1012, Orange (matt) RAL 2013, Pearl (matt) RAL 1035, Red (matt) RAL 3020, River (matt) RAL 5017, Rose (matt) RAL 3015, Silex (matt) RAL 7032, Snow (matt) RAL 9003, Terracotta (matt) or Turquoise (matt) RAL 6034. Choose the finish, the light source and the dimming version when you order. Our photographs show the black version.
Specification
| Finish |
Aqua (matt) RAL 5024, Black (matt) RAL 7021, Brass (matt), Brown (matt) RAL 8025, Burgundy (matt) RAL 3011, Concrete (matt) RAL 7033, Forest (matt) RAL 6035, Grey (matt) RAL 7037, Horizon (matt) RAL 5023, Khaki (matt) RAL 7008, Lemon (matt) RAL 1018, Limestone (matt) RAL 7035, Mango (matt) RAL 1034, Mustard (matt) RAL 1012, Orange (matt) RAL 2013, Pearl (matt) RAL 1035, Red (matt) RAL 3020, River (matt) RAL 5017, Rose (matt) RAL 3015, Silex (matt) RAL 7032, Snow (matt) RAL 9003, Terracotta (matt) & Turquoise (matt) RAL 6034 |
| Height |
22cm |
| Diameter |
17cm |
| Light Source |
Integrated LED or 1 x E27 (bulbs not included) (by version) |
| LED Power |
16.6W |
| Luminous Flux |
1350lm |
| Colour Temperature |
2700K |
| CRI |
90 |
| Max Bulb Wattage |
15W per bulb |
| Dimmable |
By version: phase cut, or non-dimmable |
| Power |
Mains, wired in by an electrician |
| Voltage |
230V |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Lead time |
Made to order, usually delivered in 4 to 8 weeks |
Frequently Asked
Does the Aspen C17A need a bulb?
It depends on the version you choose. The integrated LED version needs no bulb, while the E27 bulb version takes one E27 bulb of up to 15W, which is not included.
Can I dim this ceiling light?
Yes, if you choose the phase-cut dimmable version, which works with a compatible dimmer. The non-dimmable version cannot be dimmed, so pick the version that suits your switch.
Can it go in a bathroom?
No. It is rated IP20, so it is for dry rooms only, such as a dining room, hallway, living room or bedroom.
How big is the Aspen C17A?
It is 22cm tall and 17cm across, a compact size that sits close to the ceiling and suits rooms where a pendant would hang too low.
How bright is the integrated LED version?
The integrated LED version gives 1350 lumens of warm 2700K light from 16.6W, with a CRI of 90 so colours look natural.
How long will it take to arrive?
It is made to order for you, so it is usually delivered in 4 to 8 weeks.