Arqus Feather Lampshade White 33cm x 20cm

The Arqus is a 33cm diameter feather lampshade built on a clear vinyl frame, covered with layered white feathers that create a voluminous textured surface. The feathers are individually attached to the frame, forming a dense, rounded finish that diffuses light through the natural fibres. The shade fits standard E27 or B22 lamp holders and accepts bulbs up to 100W.

Designed for table lamps and floor lamps in bedrooms, living rooms and hallways where softer, diffused light is preferred over direct illumination, the Arquus filters light through the feather layers, reducing glare and casting a warm ambient glow. The 33cm diameter suits bedside tables, console tables and side tables in rooms where a smaller-scale shade is needed. The 20cm height provides sufficient coverage for typical table lamp bases between 30-45cm tall.

The white feathers show slight tonal variation depending on viewing angle and light intensity, ranging from soft ivory when unlit to near-translucent white when backlit by a bulb. The vinyl frame sits inside the feather covering and is not visible once the shade is fitted. At 0.44kg the shade is lightweight enough to fit most ceramic, metal and wooden lamp bases without tipping. The feathers are natural material and will accumulate dust over time, so the shade benefits from occasional gentle cleaning with a soft brush or low-power vacuum attachment.

The Arqus is part of Diyas Lighting's decorative shade collection and pairs with the Arqus range of brass and chrome table lamp bases, though it fits any standard lamp holder with a 33cm shade ring clearance. The shade is supplied without a bulb or lamp base — those are purchased separately.

How is the feather shade cleaned?

Use a soft brush or a low-power vacuum cleaner with a soft brush attachment to remove dust from the feather surface. Do not use water, spray cleaners or compressed air, as these can damage the feathers or dislodge them from the vinyl frame. Clean gently to avoid flattening the feather texture.

What lamp holders does it fit?

The Arqus fits standard E27 (Edison screw) or B22 (bayonet cap) lamp holders on table lamp bases or floor lamp bases with a shade ring or clip fitting. The 33cm diameter requires clearance of at least 35cm around the lamp holder to avoid contact with walls or other objects.

What bulb should I use?

The shade accepts bulbs up to 100W, but most users pair it with a 6-10W warm white LED bulb (2700K-3000K) to achieve soft ambient light without overheating the feathers. Avoid high-wattage halogen bulbs, as the heat can damage natural feather materials over time.

Can it be used outdoors?

No. The feather material is not weatherproof and will be damaged by moisture, wind and UV exposure. The Arqus is designed for indoor use only in dry rooms.