Arqus Feather Lampshade - Aubergine, 33 x 20cm

The Arqus is a 33cm diameter feather lampshade built on a rigid vinyl frame and covered entirely in hand-applied aubergine feathers. The feathers are layered in overlapping rows to create a dense, textured surface that diffuses light passing through from the bulb beneath. The deep plum tone of the aubergine feathers shifts between violet and burgundy depending on ambient light and viewing angle.

Designed as a replacement shade for table lamps and floor lamps with ES (E27) or BC (B22) fittings, the Arqus fits any standard lamp base rated up to 100W. The 33cm diameter and 20cm height suit compact bases used on side tables, nightstands and narrow console tables where a full-size drum shade would overwhelm the surface. The feathers soften direct glare from the bulb while allowing enough light through to function as reading or ambient lighting in bedrooms, living rooms and hallways.

Each shade is assembled by hand, with individual feathers glued to the vinyl frame in a layered pattern that creates a plush, three-dimensional surface. The feathers are dyed rather than natural, producing a consistent colour across the shade. The vinyl frame provides rigidity and prevents the shade from collapsing under the weight of the feather layers, while the small gimbal ring at the top allows the shade to balance on most lamp base fittings without modification.

The aubergine tone pairs with jewel-toned interiors, velvet upholstery, brass and gold metalwork, and dark wood furniture. The feather texture catches light in a way that smooth fabric shades do not, giving the shade a decorative presence even when the lamp is switched off.

What lamp bases does this fit?

The Arqus fits standard ES (E27) and BC (B22) lamp bases using the gimbal ring at the top of the shade. The shade is rated for bulbs up to 100W, but most users pair it with LED bulbs between 6-15W for adequate light output without overheating the feathers.

How is the shade cleaned?

Feather shades require gentle dusting with a soft brush or low-power vacuum attachment. Do not use water, cleaning sprays or damp cloths, as moisture can damage the feathers and cause discolouration. For stubborn dust, a dry microfibre cloth can be used with very light pressure.

Are the feathers real?

The feathers are dyed to achieve the consistent aubergine colour. Each shade is hand-assembled with individual feathers glued to the vinyl frame in overlapping layers.

Can it be used with a dimmer switch?

Yes, provided the bulb you use is dimmable and the lamp base is wired to a compatible dimmer. The shade itself does not contain electrical components, so dimmer compatibility depends entirely on the bulb and the lamp base wiring.