Free Delivery on all orders over £99*

Arelis LED Vertical Alabaster Wall Light - Brushed Brass

£49999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Trade Discount Available
Description

The Arelis is an 800mm vertical wall light built around three cylindrical sections of natural Spanish alabaster, held within a slim brushed brass frame with circular brass end caps and two intermediate brass rings. An integrated 16W LED running the full length of the fitting casts warm 3000K light through the stone, so the alabaster itself becomes the diffuser rather than a separate shade.

The slim 80mm width and 100mm projection allow the Arelis to sit comfortably either side of a bathroom mirror, flanking a bedhead, or running vertically alongside a hallway artwork. The vertical format suits rooms with ceiling heights of 2.4m or above, where the 800mm height reads as architectural rather than oversized. The fitting is hardwired to 230V mains and replaces a standard wall light backbox.

Each alabaster section shows different mineral veining and tonal variation depending on the block of stone it was cut from, so the three cylinders within a single Arelis rarely look identical when lit. The brushed brass frame runs behind the alabaster as a continuous rear channel, with three brass collars at the top, middle and bottom that physically hold the stone sections in place. The brushed finish softens reflections and pairs the warm brass tone with the cream of the lit alabaster.

Specification
Material Brass & Natural Spanish Alabaster
Finish Soft White & Brass
Height 800mm
Width 80mm
Projection 100mm
Lamp Socket Integrated LED
Colour Temperature 3000K
Voltage 230V
Wattage 16W
Weight -
Warranty 2 Year
Frequently Asked

Can the Arelis be used in a bathroom?

No IP rating is listed for this fitting, so it should be installed outside bathroom zones unless an IP rating is confirmed in the Specification tab. For mirror lighting in zone 2 or zone 3 of a bathroom, please contact us before purchase to confirm suitability.

Can it be mounted horizontally above a mirror?

Yes. The Arelis is symmetrical end-to-end, so although it's primarily designed as a vertical wall light it can be installed horizontally above a mirror or artwork. The hardwired connection point is concealed at the rear of the fitting and works in either orientation.

Is the LED replaceable?

The 16W 3000K LED is integrated into the fitting and is not designed to be user-replaceable. With a rated lifespan typical of integrated LED fittings, the light source is intended to last the working life of the wall light.

Does the alabaster vary between pieces?

Yes. Each of the three cylindrical sections is cut from natural Spanish alabaster, so veining, tonal variation and translucency differ between sections and between individual fittings. This is a feature of the natural stone, not a defect.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Our materials

Natural Spanish alabaster

Each piece is carved from natural Spanish alabaster, so the veining and tone are unique to your light. No two are the same.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Covered by our warranty.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Arelis is an 800mm vertical wall light built around three cylindrical sections of natural Spanish alabaster, held within a slim brushed brass frame with circular brass end caps and two intermediate brass rings. An integrated 16W LED running the full length of the fitting casts warm 3000K light through the stone, so the alabaster itself becomes the diffuser rather than a separate shade.

    The slim 80mm width and 100mm projection allow the Arelis to sit comfortably either side of a bathroom mirror, flanking a bedhead, or running vertically alongside a hallway artwork. The vertical format suits rooms with ceiling heights of 2.4m or above, where the 800mm height reads as architectural rather than oversized. The fitting is hardwired to 230V mains and replaces a standard wall light backbox.

    Each alabaster section shows different mineral veining and tonal variation depending on the block of stone it was cut from, so the three cylinders within a single Arelis rarely look identical when lit. The brushed brass frame runs behind the alabaster as a continuous rear channel, with three brass collars at the top, middle and bottom that physically hold the stone sections in place. The brushed finish softens reflections and pairs the warm brass tone with the cream of the lit alabaster.

    Specification
    Material Brass & Natural Spanish Alabaster
    Finish Soft White & Brass
    Height 800mm
    Width 80mm
    Projection 100mm
    Lamp Socket Integrated LED
    Colour Temperature 3000K
    Voltage 230V
    Wattage 16W
    Weight -
    Warranty 2 Year
    Frequently Asked

    Can the Arelis be used in a bathroom?

    No IP rating is listed for this fitting, so it should be installed outside bathroom zones unless an IP rating is confirmed in the Specification tab. For mirror lighting in zone 2 or zone 3 of a bathroom, please contact us before purchase to confirm suitability.

    Can it be mounted horizontally above a mirror?

    Yes. The Arelis is symmetrical end-to-end, so although it's primarily designed as a vertical wall light it can be installed horizontally above a mirror or artwork. The hardwired connection point is concealed at the rear of the fitting and works in either orientation.

    Is the LED replaceable?

    The 16W 3000K LED is integrated into the fitting and is not designed to be user-replaceable. With a rated lifespan typical of integrated LED fittings, the light source is intended to last the working life of the wall light.

    Does the alabaster vary between pieces?

    Yes. Each of the three cylindrical sections is cut from natural Spanish alabaster, so veining, tonal variation and translucency differ between sections and between individual fittings. This is a feature of the natural stone, not a defect.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.