Description
The Antem LED is a compact 20W floodlight that draws 220-240V AC mains and puts out 1600 lumens at a neutral 4000K white. Across the Atlantic this same fitting is the sort of unit you would shop for as an outdoor LED floodlight, and its wide 100 degree beam spreads light across a broad area rather than throwing a tight spot. The neutral colour temperature keeps surfaces looking true and reads as a clean, daylight-leaning white that suits security and general task duties outdoors. Efficiency runs at 80 lm/W, so the 20W draw is modest for the output it returns.
Around the home the Antem suits a driveway, a side passage, a back garden or a patio, and mounts equally well to a wall, a ceiling soffit or any flat surface. With a 100 degree spread and 1600 lumens it covers a doorway approach or a parking bay rather than reaching deep into a long garden, so think of it as area wash close to where it is fixed rather than long-distance throw. As a rough replacement guide, 1600 lumens is in the region of an 80W traditional halogen floodlight at roughly 20 lm/W, for a fraction of the running cost. Fix it above the zone you want lit and angle the head to cover the working area.
Construction is aluminium alloy in a black finish, which sheds heat and stands up to the weather, and the IP65 rating means it is sealed against dust and water jets for fully exposed outdoor positions. The fitting is not dimmable and runs as an integrated LED with a rated life of around 15,000 hours, so there is no bulb to replace. At 270g it is light to handle on the bracket, and the wall, ceiling or surface mount gives flexibility in how it is sited. Other wattages sit alongside this 20W model in the Antem range for larger areas.
Specification
| Power |
20W |
| Voltage |
220-240 AC |
| Luminous flux |
1600 lm |
| Efficiency |
80 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
100° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted, Surface Mounted |
| Lifespan |
15,000 hours |
| Weight |
270 g |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Frequently Asked
How bright is the Antem 20W floodlight and what does it replace?
It delivers 1600 lumens at 4000K neutral white from a 20W LED. As a rough guide that is comparable to an 80W traditional halogen floodlight, calculated at around 20 lm/W, so you get similar brightness for far less power.
How much area does it cover?
The 100 degree beam gives a wide, even wash rather than a focused throw, so it is well suited to lighting a doorway, driveway entrance or parking bay close to where it is mounted. It is an area floodlight, not a long-range spotlight, so site it above the zone you want lit.
Can it be used outdoors and in wet weather?
Yes. The Antem is rated IP65, which means it is fully sealed against dust and protected against water jets, so it is suitable for exposed outdoor positions including walls, soffits and open patios. It will handle rain and damp conditions without issue.
How should the floodlight be cleaned and maintained?
Switch it off and let it cool, then wipe the front lens and the aluminium alloy body with a soft damp cloth to clear dust, cobwebs and grime that can dim the output over time. Avoid solvents and high-pressure jets aimed directly at the seals. The integrated LED is rated for around 15,000 hours, so there is no bulb to change.