Description
The ANTEM LED 10W is a compact outdoor LED floodlight delivering 800 lumens of neutral white 4000K light. Running on 220-240V AC mains, it draws 10W for an efficiency of 80 lm/W, with a wide 100 degree beam that spreads light evenly across a near area rather than throwing a tight long-distance spot. Its small footprint makes it the led floodlight you reach for when a full 50W or 100W head would be too much. American buyers shopping for a low-wattage outdoor flood or security light will find this fills that compact end of the range.
As a guide to brightness, an 800 lumen LED output of this kind roughly matches an old 40W halogen floodlight (calculated against the roughly 20 lm/W of those older lamps), so it suits accent and short-throw duties rather than lighting a large yard. The wide 100 degree spread makes it well suited to washing a doorway, a small patio, a porch, a shed entrance or a section of fence or wall, where you want broad even coverage close to the fitting. With its IP65 rating it copes with fully exposed positions and direct rain, so it can be sited on an open wall, under an eave or above a garage entrance.
The housing is aluminium alloy in a black finish, which sheds heat to keep the integrated LED running across its rated 15,000 hour life. The IP65 sealing makes it weatherproof against dust and water jets for year-round outdoor service. At just 214g it is light to position, and it can be wall, ceiling or surface mounted depending on the angle you need. This model is not dimmable and runs direct from mains supply with no separate transformer to specify. Larger wattages in the ANTEM range cover bigger areas where more output is needed.
Specification
| Power |
10W |
| Voltage |
220-240 AC |
| Luminous flux |
800 lm |
| Efficiency |
80 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
100° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted, Surface Mounted |
| Lifespan |
15,000 hours |
| Weight |
214 g |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Frequently Asked
How bright is the ANTEM 10W and what does it replace?
It produces 800 lumens of 4000K neutral white light from a 10W draw. That output is roughly equivalent to an old 40W halogen floodlight, so it is best suited to accent lighting, doorways and small patios rather than lighting a large open area.
Can it be used outdoors in exposed positions?
Yes. The ANTEM 10W carries an IP65 rating, which makes it weatherproof against dust and water jets. It can be mounted on a fully exposed wall, under an eave or above an entrance and will withstand direct rain all year round.
How far does it throw and what area does it cover?
It has a wide 100 degree beam, so it spreads light broadly over a short distance rather than projecting a narrow long-range spot. That makes it ideal for washing a porch, fence section, shed entrance or a small patio close to the fitting.
How should I clean the ANTEM floodlight?
Switch it off and let it cool, then wipe the front glass and the aluminium body with a soft damp cloth. Avoid abrasive cleaners or high-pressure jets aimed directly at the fitting, and check the seal stays intact to maintain the IP65 weatherproofing.