Description
The Antem is a 30W LED floodlight that puts out 2400 lumens at a neutral 4000K white, spread through a wide 100 degree beam. Known across most outdoor catalogues simply as an LED floodlight, the same fitting goes by outdoor floodlight in many listings, where it covers driveways, yards and work areas in a broad even wash rather than a tight spot. The 100 degree beam keeps the throw short and wide, so light falls close to the fitting across a generous floor area instead of reaching deep into the distance, which suits illuminating a frontage, a parking bay or a side passage.
In old halogen terms this 2400 lumen output stands in for roughly a 120W halogen floodlight, working from lumens at about 20 lumens per watt, so it does the same job for a fraction of the running cost. It mounts well on a house wall, a garage gable, a soffit or a low ceiling under a carport, and the wide beam means a single unit can light a doorway, a bin store or a short driveway without dark gaps. For larger forecourts or longer runs of wall, a pair spaced apart gives more even coverage. Aim it slightly downward to keep glare off neighbours and passing traffic while still washing the surface below.
The body is aluminium alloy in a black finish, rated IP65 so it shrugs off rain and wind-driven water and stays reliable on fully exposed elevations as well as sheltered ones. It runs straight from 220 to 240V AC mains with no separate transformer, fixes by wall, ceiling or surface mounting bracket, and is not dimmable. Rated for 15,000 hours and weighing just 350g, it is light enough for a single fixing point. The wider Antem range includes other wattages if you need more or less output across a site.
Specification
| Power |
30W |
| Voltage |
220-240 AC |
| Luminous flux |
2400 lm |
| Efficiency |
80 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
100° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted, Surface Mounted |
| Lifespan |
15,000 hours |
| Weight |
350 g |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Frequently Asked
How bright is the Antem floodlight and what does it replace?
It delivers 2400 lumens at 4000K neutral white. Working from roughly 20 lumens per watt for an old halogen, that output is in the region of a 120W halogen floodlight, so it gives comparable brightness for far lower power draw.
How far does it throw and what area does it cover?
The 100 degree beam is deliberately wide, so it washes light across a broad area close to the fitting rather than projecting a long narrow throw. It suits lighting a driveway, frontage, doorway or parking bay where you want even surface coverage rather than distance.
Can it be used outdoors in all weather?
Yes. It carries an IP65 rating, which makes it weatherproof against rain and wind-driven water, so it is suitable for fully exposed outdoor positions as well as sheltered ones such as carports and porches.
How should the fitting be cleaned and maintained?
Wipe the front glass and the aluminium alloy body with a soft damp cloth when the light is off and cool, avoiding abrasive cleaners that could scratch the lens. Keeping the face clear of dust, cobwebs and leaves maintains the full 2400 lumen output.