Andrea 3 Light Crystal Bar Pendant Light - Satin Copper

The Andrea is a 3 light bar pendant with three satin copper globes suspended from an 840mm linear canopy, each globe bisected horizontally by a band of clear cut crystal. The three globes hang on adjustable cables at staggered heights, with each globe housing a single E27 bulb (sold separately). The satin copper finish is a brushed metallic surface that sits between polished copper and matt copper, reducing reflections while retaining the warm red-orange tone of the base metal.

Designed for dining tables, kitchen islands and breakfast bars between 1.8-2.4m in length, the Andrea provides three points of directed downlight plus ambient reflection from the satin copper domes. The 840mm canopy length allows the three pendants to be distributed across the length of the table rather than clustered centrally. The adjustable drop of 350-1850mm allows the globes to be set at the appropriate height above the worktop or table surface depending on ceiling height, with most installations positioning the lowest globe 700-800mm above the dining surface.

Each globe is 190mm in diameter, giving the fitting a substantial presence over an island or table without dominating smaller dining spaces. The crystal band around the equator of each globe is cut from clear faceted crystal that refracts light from the bulb inside and catches ambient room light when the fitting is switched off. The satin copper finish pairs well with warm-toned interiors, exposed brick, walnut or oak furniture, and bronze or brass hardware elsewhere in the room. The fitting weighs 2.8kg including canopy and cables.

What bulbs does the Andrea take?

The fitting takes three E27 (Edison screw) bulbs up to 60W each. Bulbs are sold separately. Most users pair this with warm-white LED bulbs between 6-10W and 2700K-3000K for dining table lighting.

Is it dimmable?

Yes, the Andrea is dimmable when paired with dimmable E27 bulbs and a compatible dimmer switch. Both the bulbs and the dimmer must support dimming — check bulb packaging for dimmer compatibility before purchasing.

What table length does it suit?

The 840mm canopy length suits dining tables and kitchen islands between 1.8-2.4m in length. For tables shorter than 1.8m the three globes may feel too spread; for tables longer than 2.4m consider pairing two Andrea fittings or choosing a 4-5 light bar pendant.

Can the drop height be adjusted after installation?

The drop is set during installation by fixing the cable length inside the canopy. Once installed the drop height is fixed unless the fitting is taken down and the cables adjusted. Set the height at installation to allow 700-800mm clearance above the dining surface.