Description
The AGOR HI is a 240W LED floodlight built for high-output exterior duty. It draws 36000 lumens from a 240W board running at 150 lm/W, with a 4000K cool white tone that reads crisp and neutral across the lit area. The beam spreads to a wide 90 degrees, washing light evenly rather than punching it into a narrow spot. North American buyers searching for an outdoor flood light or a security flood will find this is the same fitting, sized for serious area coverage.
Output at this level suits yards, loading bays, car parks, sports areas, warehouse forecourts and building facades where a single fitting needs to cover a broad working zone. The 90 degree beam throws a generous spread close to the mounting point and tapers further out, so siting it at height on a wall or gable gives the widest practical reach. As a guide on replacement, an old halogen floodlight runs at roughly 20 lumens per watt, so 36000 lumens is in the region of an 1800W halogen, meaning one AGOR HI stands in for several older lamps while drawing far less power.
The housing is aluminium alloy in a black finish, rated IP65 for full weatherproofing so it copes with exposed outdoor positions and wet locations, with an IK08 impact rating for knock resistance. It runs on 220-240V AC mains and is non-dimmable, fixed at 4000K. Mounting is by surface bracket to a wall or ceiling, with the bracket angle set on install to aim the spread. Rated lifespan is 50,000 hours. The wider Fl range covers other wattages and beam options if a different output or spread suits the site better.
Specification
| Power |
240W |
| Voltage |
220-240 AC |
| Luminous flux |
36000 lm |
| Efficiency |
150 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 70 |
| Beam angle |
90° |
| IP rating |
IP65 |
| IK rating |
IK08 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted, Surface Mounted |
| Lifespan |
50,000 hours |
| Weight |
5.71 kg |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Frequently Asked
How bright is the AGOR HI and what does it cover?
It produces 36000 lumens from 240W, a high output suited to large exterior areas such as yards, car parks and loading bays. The 90 degree beam gives a wide, even spread close to the fitting and reaches further when mounted at height. Site it on a wall or gable to make the most of the coverage.
What halogen floodlight wattage does it replace?
An older halogen floodlight runs at roughly 20 lumens per watt, so the 36000 lumen output is in the region of an 1800W halogen. One AGOR HI can therefore stand in for several traditional flood lamps while drawing only 240W. Running at 150 lm/W, it cuts energy use sharply for the same light on the ground.
Can it be used outdoors in wet weather?
Yes. The AGOR HI is rated IP65, which means it is fully weatherproof and suitable for exposed outdoor and wet locations. The aluminium alloy housing also carries an IK08 impact rating for knock resistance in working environments.
How do I clean and maintain the floodlight?
Switch it off and let it cool, then wipe the front lens and black housing with a soft damp cloth to clear dust, salt and grime that can dull output over time. Avoid abrasive pads or solvents on the lens. Keeping the face clean helps the fitting hold its full 36000 lumen output across its 50,000 hour rated life.