ADTR SKY 600x600 Recessed LED Ceiling Light - White

The ADTR SKY is a square LED ceiling light built to drop into a ceiling rather than sit proud of it. At 601.2 × 601.2 × 56 mm it carries the standard 600x600 grid footprint, with a slim 56 mm body that tucks neatly into the void above the ceiling line. The integrated LED arrangement means there is no separate bulb to fit or replace, and the broad emitting face spreads light evenly across the room rather than throwing a single narrow pool. American buyers will recognise the format as a flush mount ceiling fixture sized to a 2x2 grid, sitting level with the surrounding tiles or plasterboard.

Square recessed fittings of this kind work well across hallways, landings, kitchens and home offices where a flat, low-profile ceiling presence is wanted. The even output suits general room lighting rather than directional accenting, and the square face lines up cleanly with the surrounding ceiling so it reads as part of the structure. Because it recesses into the ceiling, allow for the 56 mm depth plus clearance in the void above before fitting, and plan the position to give balanced coverage across the floor area. It is best suited to rooms with enough ceiling depth to take the housing fully.

The body is finished in white so it blends with most painted and tiled ceilings, and the square form gives a defined edge against the surrounding surface. Mounting is recessed into the ceiling, fixed flush so only the emitting face is visible once installed. At 1.15 kg it is light enough to handle single-handed during fitting. As an IP20 fitting it is intended for dry indoor rooms only and should be kept clear of bathrooms, damp areas and any outdoor location. The ADTR SKY sits within the wider Adtr range, which offers further square ceiling formats for matching across a project.

Does this fit a standard 600x600 ceiling grid?

Yes. With a 601.2 × 601.2 mm face it matches the common 600x600 modular grid used in suspended and tiled ceilings. It sits flush with the surrounding tiles once recessed into place.

Can it be used in a bathroom or outdoors?

No. This is an IP20 fitting rated for dry indoor use only, so keep it out of bathrooms, damp areas and any outdoor or sheltered-outdoor location. Use it in hallways, kitchens, offices and similar dry rooms instead.

Does it use a replaceable bulb?

No. The LED is integrated into the fitting, so there is no separate lamp to buy or swap. The whole unit provides the light source as one sealed assembly.

How do I clean it?

Wipe the white face gently with a soft, dry or lightly damp cloth once the light is off and cool. Avoid abrasive pads and harsh solvents, which can mark the finish over time.