ADTR PT 600x600 Recessed Square Ceiling Light - White

The ADTR PT is a recessed square LED ceiling light built to sit flush within the ceiling line, giving a clean, frameless look across the room. Its compact 640 × 640 mm footprint suits a 600x600 grid layout, while the slim 56 mm body keeps the fitting tucked tightly into the void above. The integrated LED format means there is no separate bulb to replace, so the light source stays even and consistent across the whole square face. American buyers will recognise the format as a flush mount LED ceiling light, recessed rather than surface fixed, with the diffuser sitting level with the ceiling surface for a low-profile finish.

This fitting works well as ambient lighting for kitchens, hallways, landings and home offices, where a flush square panel keeps the ceiling uncluttered and the light spread broad and soft. Because it recesses into the ceiling, it suits rooms with a standard or higher ceiling height where there is sufficient void depth behind the plasterboard to take the 56 mm body. It gives a general wash of light rather than a tight task beam, so position it centrally for an even fill, or use more than one across larger open-plan spaces to balance the coverage. As an indoor fitting, it belongs in dry living and circulation areas; keep it clear of bathrooms, porches and any damp or outdoor location.

The ADTR PT is finished in white to blend into most ceiling colours, with a square diffuser face that softens the LED output. It recesses into the ceiling rather than surface mounting, sitting within a cut-out that the slim 56 mm depth helps accommodate in tight voids. At 950 g it is light enough to handle and position during installation. The white frame and flat diffuser are easy to wipe clean when needed. This fitting is part of the wider ADTR range at Niori for matching recessed square lighting across a project.

Can the ADTR PT be used outdoors or in a bathroom?

No. This is a dry indoor fitting and should not be installed outdoors, in a porch, or in a bathroom, shower or any damp area. Keep it to living rooms, hallways, kitchens and other dry interior spaces.

Does it use a replaceable bulb?

No, the ADTR PT has an integrated LED rather than a replaceable lamp. The light source is built into the fitting, which keeps the output even across the square face and removes the need to source matching bulbs.

What room size does it suit?

It works as ambient lighting for smaller to mid-sized rooms such as kitchens, hallways, landings and home offices. For larger or open-plan areas, fit more than one and space them evenly to keep the light spread balanced across the ceiling.

How do I clean the diffuser?

Wipe the white frame and flat diffuser with a soft, dry or slightly damp cloth once the fitting is switched off and cool. Avoid abrasive cleaners or solvents, which can mark the diffuser surface over time.