ADTR-H 1200x300 LED Ceiling Light - Silver

The ADTR-H is a rectangular surface-mounted LED ceiling light measuring 1200 x 300 mm, with the LED board built directly into the fitting rather than taking a replaceable bulb. The elongated form spreads light along a wider footprint than a round fitting, which suits rooms where you want even brightness across a longer space rather than a single central pool. In US terms a fitting like this would sit alongside flush mount LED ceiling lights, sitting close to the ceiling line at a shallow 65 mm depth.

Its proportions make it a natural fit for hallways, kitchens, home offices and utility rooms, where the rectangular spread covers a run of worktop or a corridor more evenly than a single round point. As an integrated LED ceiling light it keeps a low profile, so it works well on standard or lower ceilings where a deeper or suspended fitting would feel intrusive. For a typical hallway or medium room a single unit gives broad, general coverage, and the long format helps light reach the corners that a compact round fitting can leave dim. Position it centrally over the area you most want lit, allowing for the 1200 mm length when planning the layout.

Construction centres on a slim rectangular body in a silver finish, weighing 1.76 kg, which keeps mounting straightforward on a standard ceiling fixing point. It is rated IP20, so it is intended for dry indoor use only and should be kept out of bathrooms, porches and any damp or exposed location. The integrated LED removes the need to replace bulbs over the life of the fitting, and the surface-mount design means it sits flush against the ceiling without a recessed cut-out. The ADTR-H range includes further sizes if you need to match the look across several rooms.

Can this be used outdoors or in a bathroom?

No. The ADTR-H is rated IP20, which covers dry indoor use only. Keep it clear of bathrooms, porches and any damp or exposed position, and choose a higher IP-rated fitting for those areas.

Does it take a replaceable bulb?

No, the LED is integrated into the fitting, so there is no separate bulb to change. The light source is built into the unit and designed to last the life of the fitting, which is why there are no lamp holders to maintain.

Is it suitable for a low ceiling?

Yes. At just 65 mm deep it is a surface-mounted, close-to-ceiling fitting, so it sits flush without hanging down like a pendant or suspended light. That shallow profile makes it a good choice for rooms with limited headroom.

How do I clean it?

Switch the fitting off and let it cool, then wipe the surface with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents on the silver finish, and make sure the unit is fully dry before switching it back on.