Description
This adjustable recessed spotlight from the Glozo range is a directional ceiling fitting that takes a single GU10 twist-lock lamp, which is not included. The head tilts through 20 degrees, so the light can be angled away from straight down once the fitting is set into the ceiling. It is built for a standard 90mm cut-out and accepts lamps up to 2W, leaving the choice of brightness and tone to the bulb you fit.
Because the head pivots, this fitting suits rooms where light needs to be aimed rather than spread evenly. Use it to graze a feature wall, pick out artwork or a shelf display, or wash a worktop or reading zone from above. A run of them across a kitchen, hallway or living room ceiling lets each head point at its own target, and the tilt makes it simple to fine-tune the angle after installation. It is an IP20 fitting, so it is for dry indoor positions only and should be kept clear of bathrooms and exposed areas.
The body is aluminium alloy in a rectangular form measuring 185 by 100 by 40mm, finished in a choice of white or black to sit with most ceilings. It is a recessed fitting that drops into the 90mm cut-out, with the GU10 lamp twisting into the holder behind the trim. Whether the light dims depends on the bulb and switch you pair with it, not on the fitting itself.
Specification
| Fitting type |
Adjustable spotlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Tiltable, 20° |
| Cut-out |
90mm cut-out |
| Max lamp wattage |
max 2W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy |
| Colour / finish |
White / Black |
| Dimensions |
185 × 100 × 40 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included?
No, this fitting is supplied without a lamp. It takes a single GU10 twist-lock bulb, which you buy separately and choose for the brightness and tone you want.
What size cut-out does it need?
It is a recessed fitting designed for a 90mm cut-out in the ceiling. Make sure there is enough clearance above the ceiling for the body and the GU10 lamp.
How far does the head tilt?
The head tilts through 20 degrees, so you can angle the beam away from straight down. That lets you aim it at a wall, a picture or a worktop and adjust it after fitting.
Can I use it in a bathroom or outdoors?
No. This fitting is rated IP20, which means dry indoor use only. Keep it out of bathrooms, covered porches and any position exposed to moisture.
Downloads
Product Specification Sheet
Range Datasheet