Description
This adjustable spotlight is a recessed fitting that accepts a single GU10 twist-lock lamp, which is not included so you can pick the brightness and tone that suits the room. The round head tilts through 20 degrees, letting you angle the beam away from straight down to aim it where it is wanted. It takes a lamp of up to 10W, drops into a 90mm cut-out and sits almost flush, with a slim Ø103mm trim and a 60mm body depth.
Because the head directs rather than floods, it suits picking out a framed picture, washing light across a textured wall, or marking a zone such as a reading chair, an island or a display shelf. Several fittings set in a line can be aimed individually to follow a run of artwork or a worktop. The IP20 rating means it is for dry interior use only, so keep it to living rooms, hallways, bedrooms and similar spaces and clear of bathroom zones or anywhere exposed to splashes.
The housing is aluminium alloy in a matte white finish that reads cleanly against a plain ceiling. Mounting is recessed via spring clips into the 90mm cut-out, with the tilt mechanism holding the chosen angle once set. A GU10 lamp is supplied separately, and whether the fitting can be dimmed depends entirely on the bulb you fit, so check the lamp's own rating for that. Part of the Laven range.
Specification
| Fitting type |
Adjustable spotlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Tiltable, 20° |
| Cut-out |
90mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy |
| Colour / finish |
Matte White |
| Dimensions |
Ø103 × 60 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included?
No, this fitting is supplied without a lamp. It takes a single GU10 twist-lock bulb, which you choose and buy separately so you can set the brightness and colour tone yourself.
How far does the head tilt?
The round head adjusts through 20 degrees from the vertical, so you can angle the beam off straight-down to aim it at a wall, a picture or a particular zone. It holds the set position once moved.
What size cut-out does it need?
It drops into a 90mm cut-out and is held by spring clips. The visible trim is Ø103mm and the body is 60mm deep, so allow that depth of clearance above the ceiling.
Can I use it in a bathroom or outdoors?
No. The fitting is rated IP20, which is for dry indoor use only, so keep it out of bathroom zones and away from any spot exposed to moisture or the weather.
Downloads
Product Specification Sheet
Range Datasheet