Description
This adjustable spotlight is a recessed fitting that takes a single GU10 twist-lock lamp, supplied without a bulb so you can match the brightness and tone to the room. The round head tilts up to 15 degrees, letting you aim the beam where it is wanted rather than straight down. It accepts lamps up to 10W, and the GU10 fitting twists into place without tools. Part of the Aret range, the round profile measures Ø99 by 29 mm and sits neatly into a standard recess.
Tilting the head makes it well suited to picking out a picture, washing a feature wall or directing light onto a worktop or display zone. Group several across a ceiling to angle light across a living room, hallway or kitchen, or use a single unit to highlight one focal point. Rated IP20, it is intended for dry indoor locations and should be kept away from bathrooms, porches and anywhere exposed to moisture. The shallow 29 mm depth helps where ceiling void space is limited.
The housing is aluminium alloy in a black matt finish, which holds its colour and resists fingerprints in daily use. It fits a 75mm cut-out and pushes into the recess on its spring clips, gripping the ceiling board for a flush, secure hold. The tilt mechanism stays put once set, so the beam direction holds after adjustment. Whether the chosen GU10 lamp can be dimmed depends on the bulb fitted, not on the fitting itself.
Specification
| Fitting type |
Adjustable spotlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Tiltable, 15° |
| Cut-out |
75mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy |
| Colour / finish |
Black Matt |
| Dimensions |
Ø99 × 29 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included?
No, the fitting is supplied without a lamp. It accepts a single GU10 twist-lock bulb up to 10W, bought separately so you can choose the brightness and colour tone you prefer.
How far does the spotlight tilt?
The round head tilts up to 15 degrees from vertical. That is enough to angle the beam towards a picture, a wall or a worktop while the fitting stays recessed in the ceiling.
What cut-out does it need?
It needs a 75mm cut-out and pushes in on its spring clips to grip the ceiling board. With a depth of 29 mm it suits ceilings with limited void space.
Can it be used in a bathroom or outdoors?
No. It is rated IP20 for dry indoor use only, so keep it clear of bathrooms, porches and any location exposed to moisture or splashing.
Downloads
Product Specification Sheet
Range Datasheet