Description
This adjustable spotlight is a recessed light fitting that accepts a single GU10 twist-lock lamp, which is not included so you can pick the output and tone you prefer. The square head tilts through 20 degrees, letting you aim the chosen bulb at a picture, a feature wall or a defined zone rather than fixing it straight down. It takes a lamp of up to 10W, and the GU10 cap simply twists into place, making bulb changes quick.
Sized at 100 by 100 by 40 mm with a 90mm cut-out, the Laven sits flush in a plasterboard or panelled ceiling and the shallow body suits rooms with limited void depth above. The tilt makes it a practical choice for accent lighting over kitchen worktops, alcoves, shelving or artwork, where the beam needs directing onto a specific surface. Rated IP20, it is for dry indoor use only, so keep it clear of bathroom zones and any sheltered outdoor positions.
The housing is aluminium alloy, finished in white or black to blend with the ceiling or stand out as a detail. The square trim gives a crisp, geometric look against rectangular tiles and panels. Bear in mind the fitting itself carries no light rating, so brightness, colour and dimming all depend on the GU10 bulb you fit. Wipe the trim occasionally with a soft dry cloth to keep it clean.
Specification
| Fitting type |
Adjustable spotlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Tiltable, 20° |
| Cut-out |
90mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy |
| Colour / finish |
White / Black |
| Dimensions |
100 × 100 × 40 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included?
No, the fitting is supplied without a lamp. It accepts a single GU10 twist-lock bulb of up to 10W, which you choose and buy separately to suit the brightness and tone you want.
What cut-out hole does it need?
It requires a 90mm cut-out in the ceiling. The body measures 100 by 100 by 40 mm overall, so the square trim covers the edge of the hole, and the shallow 40 mm depth suits ceilings with a limited void above.
How far does the head tilt?
The square head is adjustable through 20 degrees, so you can angle the chosen bulb towards artwork, a wall or a particular zone rather than aiming it straight down.
Can it be used in a bathroom or outdoors?
No. With an IP20 rating it is for dry indoor use only, so keep it out of bathroom zones and away from any damp or outdoor locations.
Downloads
Product Specification Sheet
Range Datasheet