Description
The Acete is a 30W LED floodlight built for outdoor security and area lighting. It puts out up to 3240 lumens across a wide 90° beam, washing a broad area with even light rather than a tight throw. White light is colour selectable across 3000K warm, 4000K neutral and 6500K cool, so the same fitting can read as soft and welcoming over a doorway or crisp and bright over a yard. Anyone shopping the US market would recognise it as an LED flood or outdoor flood light, and the integrated panel means there is no separate lamp to fit.
Outdoor walls and soffits are the natural home for this floodlight, lighting driveways, side passages, garden frontages, car ports and small commercial forecourts. With a 90° spread the light fans out close to the fitting rather than reaching far down a long boundary, so it suits washing a wall or covering a parking bay more than spotlighting a distant point. As a rough guide on brightness, an old halogen floodlight runs at around 20 lumens per watt, so this LED's 3240 lumen output is in the region of a 160W halogen flood while drawing only 30W. Mount it high enough to clear head height and angle it down to cover the working area.
The housing is aluminium alloy in a grey finish, which helps draw heat away from the LEDs and supports the rated 25,000 hour lifespan. An IP65 rating means it is fully weatherproof and sealed against dust and water jets, so it copes with exposed, rain-hit positions as well as sheltered ones. It can be ceiling or wall mounted and weighs just 334g, keeping the bracket load light. This model is not dimmable. The Acete range covers a span of floodlight wattages if you need a brighter or lower output elsewhere on site.
Specification
| Power |
30W |
| Voltage |
220-240 AC |
| Luminous flux |
2400 / 3240 / 2910 lm |
| Colour temperature |
3000/4000/6500K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
90° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Ceiling Mounted, Wall Mounted |
| Lifespan |
25,000 hours |
| Weight |
334 g |
| Material |
Aluminium Alloy |
| Finish |
Grey |
Downloads
Frequently Asked
How bright is it and what does it cover?
It produces up to 3240 lumens depending on the chosen colour temperature, spread across a wide 90° beam. That makes it well suited to washing a wall, driveway or parking bay with even light rather than throwing a narrow beam over a long distance. Mounting it higher widens the coverage on the ground below.
What halogen wattage does it replace?
An older halogen floodlight produces roughly 20 lumens per watt, so this 3240 lumen LED is in the region of a 160W halogen flood. The difference is that the Acete draws only 30W to do it, cutting running costs sharply while giving the same usable light.
Can it be used outdoors in the rain?
Yes. It carries an IP65 rating, which means it is fully sealed against dust and protected against water jets from any direction. That makes it suitable for exposed outdoor positions on walls and soffits, including spots that take direct rain.
How do I clean it and keep it bright?
Switch off the power and let the fitting cool, then wipe the front glass and the grey aluminium body with a soft damp cloth. Avoid abrasive pads or harsh solvents that could mark the finish or the lens. Clearing dust and grime from the glass keeps the light output at its best.