Acete 100W LED Floodlight Colour Selectable IP65 - Grey

The Acete is a 100W LED floodlight that pushes out a strong, broad wash of light, with a measured luminous flux of 8500, 10800 or 9700 lumens depending on the colour temperature selected. American buyers searching for an outdoor LED floodlight will recognise the format straight away. It runs on 220 to 240V AC mains and carries a wide 90 degree beam angle, spreading light across a generous arc rather than throwing a narrow spot. Colour is selectable across 3000K warm white, 4000K neutral white and 6500K daylight, so the same fitting can be tuned to suit the setting.

The wide beam and high output make the Acete suited to driveways, yards, car parks, building frontages and security duty across larger external areas. At 90 degrees it covers a broad footprint close to the wall rather than reaching far down a long approach, so it works best mounting at eaves or fascia height to flood the ground below. To gauge brightness against older kit, the 10800 lumen output is roughly equivalent to a 540W halogen floodlight, giving far more light for the wattage drawn.

Built from aluminium alloy in a grey finish, the Acete carries an IP65 rating, so it is sealed against dust and direct water jets and rated for fully exposed outdoor and wet locations. It can be ceiling or wall mounted, and at 840g it sits easily on standard external brackets. The unit is not dimmable and has a rated lifespan of 25,000 hours, with a colour rendering of Ra 80. Other wattages are available across the Acete range for smaller or larger sites.

How bright is this floodlight?

It delivers between 8500 and 10800 lumens depending on the colour temperature chosen, drawing 100W. That is a high output suited to lighting larger outdoor areas such as driveways, yards and building frontages.

What halogen wattage does it replace?

At around 10800 lumens, the Acete is roughly equivalent to an old 540W halogen floodlight, since traditional halogen units produce about 20 lumens per watt. You get the same flood of light for a fraction of the energy use.

Can it be used outdoors in wet weather?

Yes. The IP65 rating means it is sealed against dust and direct water jets, so it is suitable for fully exposed outdoor and wet locations. It can be wall or ceiling mounted on external surfaces.

How should the housing be cleaned?

Switch off the supply and let the fitting cool, then wipe the front lens and aluminium body with a soft damp cloth. Avoid abrasive cleaners or high pressure jets aimed directly at the seals, which keeps the IP65 protection intact.