Description
The Knightsbridge 4-gang modular faceplate accepts up to four standard euro module inserts, allowing custom configurations of TV coax, HDMI, CAT6 data, USB, telephone and other low-voltage outlets behind a single polished chrome plate. The faceplate measures 146.5mm wide by 85.75mm tall and fits a standard 25mm minimum back box, with each of the four apertures sized to accept one single-width euro module insert (sold separately).
Designed for AV wall plates behind TVs, office desks needing data and power separation, hotel rooms, and any installation where multiple connection types need to be grouped on a single wall plate. The modular approach means you choose exactly which inserts to fit rather than being locked into a fixed combination, and individual inserts can be swapped out later without replacing the entire faceplate. Common configurations include two HDMI plus one CAT6 data plus one blank, or three CAT6 data ports plus one coax TV socket.
The polished chrome finish provides a high-gloss reflective surface that pairs with contemporary and modern interiors. The rounded edge profile softens the transition between plate and wall compared to a sharp square edge, and the premium-grade steel construction gives the plate rigidity without flexing when modules are inserted or cables are connected. The plate fixes to the back box with two screws (visible once installed), and provides an earth terminal for safety continuity where metal-bodied euro modules are used.
Specification
| Height |
85.75 mm |
| Width |
146.5 mm |
| Projection |
7.5 mm |
| Construction |
Premium grade steel |
| Finish |
Polished Chrome |
| Class |
I |
| IP Rating |
IP20 |
| Earth Terminal |
Yes |
| Warranty |
25 |
Downloads
Product Specification Sheet
Product Manual
Frequently Asked
What euro modules does this faceplate accept?
The faceplate accepts standard single-width euro modules including HDMI, CAT6 data, CAT5e data, coax TV (F-type), USB-A, USB-C, 3.5mm audio, telephone (RJ11), speaker terminals and blank inserts. Each of the four apertures fits one single-width module. Euro modules are sold separately and must be purchased to complete the installation.
What back box depth is required?
A 25mm minimum back box depth is needed. Deeper back boxes (35mm or 47mm) provide more cable management space and are recommended for installations with multiple cables or bulky connectors behind the plate.
Can I mix different module types on the same plate?
Yes. The modular design allows any combination of euro modules to be fitted across the four apertures. Common configurations include HDMI plus data, multiple data ports, or a mix of AV and telephone connections depending on the installation requirements.
Is this a screwless faceplate?
No. The faceplate fixes to the back box with two visible screws. For a screwless alternative with concealed fixings, see the Knightsbridge screwless modular range (separate product line).