Free Delivery on all orders over £99*

4 Gang 2-Way 10-200W Intelligent Dimmer - Brushed Brass

£6199
The RRP is the manufacturer's recommended retail price of the item.
60 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 4-gang 2-way intelligent dimmer controls four separate lighting zones from a single 147.5mm x 87.5mm brushed brass faceplate, handling 10-200W incandescent or halogen loads and 5-150W LED loads per gang. The dimmer switches between trailing-edge and leading-edge modes via a front-panel control knob, making it compatible with most dimmable lamp types without needing to access the back box wiring.

Designed for multi-zone residential lighting control in living rooms, dining rooms and master bedrooms, each gang operates independently on a push on/off, rotary dimming action. The 2-way configuration allows the same lighting circuit to be controlled from two separate switch positions — typically at opposite ends of a room or at the top and bottom of a staircase. The dimmer arrives preset in trailing-edge mode, which suits most LED and electronic transformers, but can be switched to leading-edge mode for older magnetic transformers or specific lamp compatibility.

The brushed brass finish provides a warm metallic accent on premium-grade steel construction with a 2.5mm projection from the wall once fitted to a 25mm minimum back box. Each gang includes overload and overheat protection, plus an inrush current limiter (ICL) to prevent nuisance tripping when switching on high-draw LED arrays. The front-panel trim and mode-switching knob allows the dimmer to be reset or recalibrated if lamps are changed in future without needing to pull the plate off the wall.

All four zones must use the same brand and wattage of dimmable lamps — mixing different lamp brands, wattages or types (e.g. LED with halogen) on the same dimmer will cause flicker, noise or inconsistent dimming behaviour. The IP20 rating restricts use to dry indoor locations only.

Specification
Height 87.5 mm
Width 147.5 mm
Projection 2.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Brushed Brass
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What's the difference between trailing-edge and leading-edge modes?

Trailing-edge mode suits most modern dimmable LEDs and electronic transformers — it's the preset mode on this dimmer. Leading-edge mode suits older magnetic transformers and some halogen lamps. The dimmer can be switched between modes using the front-panel control knob without rewiring.

Can I use different lamp brands on the four gangs?

No. All lamps controlled by this dimmer must be the same brand, wattage and type. Mixing different brands or wattages causes flicker, buzzing or inconsistent dimming. If you need to control different lamp types independently, use separate single-gang dimmers instead.

What does 2-way mean?

2-way means the same lighting circuit can be controlled from two separate switch positions, such as at opposite ends of a hallway or at the top and bottom of a staircase. This requires additional intermediate wiring between the two switch positions.

What back box depth is required?

A 25mm minimum back box depth is needed. The 2.5mm projection of the faceplate sits flush with most plasterboard and skimmed walls once fitted.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 4-gang 2-way intelligent dimmer controls four separate lighting zones from a single 147.5mm x 87.5mm brushed brass faceplate, handling 10-200W incandescent or halogen loads and 5-150W LED loads per gang. The dimmer switches between trailing-edge and leading-edge modes via a front-panel control knob, making it compatible with most dimmable lamp types without needing to access the back box wiring.

    Designed for multi-zone residential lighting control in living rooms, dining rooms and master bedrooms, each gang operates independently on a push on/off, rotary dimming action. The 2-way configuration allows the same lighting circuit to be controlled from two separate switch positions — typically at opposite ends of a room or at the top and bottom of a staircase. The dimmer arrives preset in trailing-edge mode, which suits most LED and electronic transformers, but can be switched to leading-edge mode for older magnetic transformers or specific lamp compatibility.

    The brushed brass finish provides a warm metallic accent on premium-grade steel construction with a 2.5mm projection from the wall once fitted to a 25mm minimum back box. Each gang includes overload and overheat protection, plus an inrush current limiter (ICL) to prevent nuisance tripping when switching on high-draw LED arrays. The front-panel trim and mode-switching knob allows the dimmer to be reset or recalibrated if lamps are changed in future without needing to pull the plate off the wall.

    All four zones must use the same brand and wattage of dimmable lamps — mixing different lamp brands, wattages or types (e.g. LED with halogen) on the same dimmer will cause flicker, noise or inconsistent dimming behaviour. The IP20 rating restricts use to dry indoor locations only.

    Specification
    Height 87.5 mm
    Width 147.5 mm
    Projection 2.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Brushed Brass
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What's the difference between trailing-edge and leading-edge modes?

    Trailing-edge mode suits most modern dimmable LEDs and electronic transformers — it's the preset mode on this dimmer. Leading-edge mode suits older magnetic transformers and some halogen lamps. The dimmer can be switched between modes using the front-panel control knob without rewiring.

    Can I use different lamp brands on the four gangs?

    No. All lamps controlled by this dimmer must be the same brand, wattage and type. Mixing different brands or wattages causes flicker, buzzing or inconsistent dimming. If you need to control different lamp types independently, use separate single-gang dimmers instead.

    What does 2-way mean?

    2-way means the same lighting circuit can be controlled from two separate switch positions, such as at opposite ends of a hallway or at the top and bottom of a staircase. This requires additional intermediate wiring between the two switch positions.

    What back box depth is required?

    A 25mm minimum back box depth is needed. The 2.5mm projection of the faceplate sits flush with most plasterboard and skimmed walls once fitted.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.