Free Delivery on all orders over £99*

24V 36W LED Power Adaptor - Black Constant Voltage Driver

£2499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge LEDAD36 is a 24V constant voltage LED power adaptor rated at 36W maximum output, designed to supply low-voltage LED cabinet lights, strip lights and furniture lighting. The adaptor converts 220-240V AC mains input to 24V DC output at 1.5A, housed in a black polycarbonate case measuring 110mm x 53mm x 36mm.

Designed for installation inside kitchen plinths, under cabinets, or behind furniture where mains voltage cannot be run directly to the LED fittings, the adaptor includes a 1.5m output cable with exposed core terminations for direct connection to LED strip or cabinet lighting cable runs. The input cable terminates in a standard UK 3-pin plug. The Class II construction (double-insulated) means no earth connection is required, simplifying installation in non-metallic furniture and cabinetry.

The constant voltage output maintains a stable 24V across the LED load, which is essential for colour consistency and longevity in LED strip and cabinet lighting. The IP20 rating suits dry indoor locations only — the adaptor is not suitable for bathrooms, outdoor use, or anywhere moisture ingress is possible. The 36W maximum output supports approximately 3 metres of typical 12W-per-metre LED strip at full brightness, or multiple low-wattage cabinet puck lights wired in parallel.

Specification
Length 110 mm
Height 36 mm
Width 53 mm
Construction Polycarbonate
Finish Black
Class II
IP Rating IP20
Primary Voltage 230V 50Hz
Dimmable No
Driver Type Constant Voltage
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What LED fittings is this compatible with?

The adaptor suits any 24V constant voltage LED fitting with a total wattage up to 36W. This includes most LED strip lights rated at 24V (typically 12W per metre, supporting up to 3m), under-cabinet puck lights, and furniture-mounted LED bars. Check the LED fitting's voltage and wattage requirements before connecting.

Is this dimmable?

No. The LEDAD36 provides non-dimmable constant voltage output. If dimming is required, pair the LED fittings with a separate inline 24V LED dimmer module downstream of this adaptor, or use a dedicated dimmable LED driver instead.

Can it be used outdoors or in bathrooms?

No. The IP20 rating means the adaptor is suitable for dry indoor locations only. It is not protected against moisture ingress and must not be installed in bathrooms, wet rooms, outdoor locations, or anywhere water or condensation is present.

Does the output cable need to be extended?

The 1.5m output cable with exposed cores allows direct connection to LED strip or cabinet light cable runs. If additional length is needed, use appropriate twin-core low-voltage cable rated for 24V DC and connect using suitable terminal blocks or soldered joints.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge LEDAD36 is a 24V constant voltage LED power adaptor rated at 36W maximum output, designed to supply low-voltage LED cabinet lights, strip lights and furniture lighting. The adaptor converts 220-240V AC mains input to 24V DC output at 1.5A, housed in a black polycarbonate case measuring 110mm x 53mm x 36mm.

    Designed for installation inside kitchen plinths, under cabinets, or behind furniture where mains voltage cannot be run directly to the LED fittings, the adaptor includes a 1.5m output cable with exposed core terminations for direct connection to LED strip or cabinet lighting cable runs. The input cable terminates in a standard UK 3-pin plug. The Class II construction (double-insulated) means no earth connection is required, simplifying installation in non-metallic furniture and cabinetry.

    The constant voltage output maintains a stable 24V across the LED load, which is essential for colour consistency and longevity in LED strip and cabinet lighting. The IP20 rating suits dry indoor locations only — the adaptor is not suitable for bathrooms, outdoor use, or anywhere moisture ingress is possible. The 36W maximum output supports approximately 3 metres of typical 12W-per-metre LED strip at full brightness, or multiple low-wattage cabinet puck lights wired in parallel.

    Specification
    Length 110 mm
    Height 36 mm
    Width 53 mm
    Construction Polycarbonate
    Finish Black
    Class II
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Dimmable No
    Driver Type Constant Voltage
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What LED fittings is this compatible with?

    The adaptor suits any 24V constant voltage LED fitting with a total wattage up to 36W. This includes most LED strip lights rated at 24V (typically 12W per metre, supporting up to 3m), under-cabinet puck lights, and furniture-mounted LED bars. Check the LED fitting's voltage and wattage requirements before connecting.

    Is this dimmable?

    No. The LEDAD36 provides non-dimmable constant voltage output. If dimming is required, pair the LED fittings with a separate inline 24V LED dimmer module downstream of this adaptor, or use a dedicated dimmable LED driver instead.

    Can it be used outdoors or in bathrooms?

    No. The IP20 rating means the adaptor is suitable for dry indoor locations only. It is not protected against moisture ingress and must not be installed in bathrooms, wet rooms, outdoor locations, or anywhere water or condensation is present.

    Does the output cable need to be extended?

    The 1.5m output cable with exposed cores allows direct connection to LED strip or cabinet light cable runs. If additional length is needed, use appropriate twin-core low-voltage cable rated for 24V DC and connect using suitable terminal blocks or soldered joints.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.