Free Delivery on all orders over £99*

20A Flex Outlet Plate - Smoked Bronze Screwless

£899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 20A flex outlet plate provides a hard-wired connection point for fixed appliances such as water heaters, electric towel rails, wall-mounted convection heaters and central heating pumps. The smoked bronze screwless faceplate is constructed from 201 stainless steel with a dark bronze PVD coating that hides fingerprints and integrates with warm-toned metalwork and contemporary bathroom and kitchen fittings.

Designed for permanent installation rather than plug-and-socket applications, the outlet accepts cables up to 10mm diameter and features internal strain relief to prevent cable pull-out under vibration or accidental tension. Terminal capacity handles three 2.5mm² cables or two 4.0mm² cables, with twin earth terminals for multi-cable installations. The 20A rating at 230V 50Hz supports loads up to 4,600W, covering most domestic fixed appliances including 3kW instantaneous water heaters and higher-output towel radiators.

The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, leaving no visible fixings on the wall once installed. The faceplate sits 4.3mm proud of the wall surface, giving a low-profile finish that works in tight spaces behind radiators or alongside built-in cabinetry. The IP20 rating restricts the outlet to dry indoor locations — bathrooms require outlets to be positioned outside splash zones, typically 600mm or more from taps and showerheads.

Specification
Height 87.5mm
Width 87.5mm
Depth 21.5mm
Projection 4.3°
Recessed Depth 17.2mm
Min. Mounting Box Depth 25mm
Construction 201 Stainless steel
Finish Smoked Bronze
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Downloads

Product Specification Sheet

Frequently Asked

What appliances is this outlet designed for?

The 20A rating at 230V supports loads up to 4,600W, making it suitable for hard-wired water heaters, electric towel rails, wall-mounted convection heaters, central heating pumps and other fixed appliances. It is not designed for plug-and-socket use.

What back box depth is required?

A 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.

Can this be used in bathrooms?

The IP20 rating restricts the outlet to dry indoor locations. In bathrooms, it must be positioned outside splash zones — typically 600mm or more from taps, showerheads and bath edges — and must comply with BS 7671 wiring regulations for bathroom zones.

Is the screwless plate removable for redecorating?

Yes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the outlet and re-clipped without re-wiring.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 20A flex outlet plate provides a hard-wired connection point for fixed appliances such as water heaters, electric towel rails, wall-mounted convection heaters and central heating pumps. The smoked bronze screwless faceplate is constructed from 201 stainless steel with a dark bronze PVD coating that hides fingerprints and integrates with warm-toned metalwork and contemporary bathroom and kitchen fittings.

    Designed for permanent installation rather than plug-and-socket applications, the outlet accepts cables up to 10mm diameter and features internal strain relief to prevent cable pull-out under vibration or accidental tension. Terminal capacity handles three 2.5mm² cables or two 4.0mm² cables, with twin earth terminals for multi-cable installations. The 20A rating at 230V 50Hz supports loads up to 4,600W, covering most domestic fixed appliances including 3kW instantaneous water heaters and higher-output towel radiators.

    The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, leaving no visible fixings on the wall once installed. The faceplate sits 4.3mm proud of the wall surface, giving a low-profile finish that works in tight spaces behind radiators or alongside built-in cabinetry. The IP20 rating restricts the outlet to dry indoor locations — bathrooms require outlets to be positioned outside splash zones, typically 600mm or more from taps and showerheads.

    Specification
    Height 87.5mm
    Width 87.5mm
    Depth 21.5mm
    Projection 4.3°
    Recessed Depth 17.2mm
    Min. Mounting Box Depth 25mm
    Construction 201 Stainless steel
    Finish Smoked Bronze
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Downloads

    Product Specification Sheet

    Frequently Asked

    What appliances is this outlet designed for?

    The 20A rating at 230V supports loads up to 4,600W, making it suitable for hard-wired water heaters, electric towel rails, wall-mounted convection heaters, central heating pumps and other fixed appliances. It is not designed for plug-and-socket use.

    What back box depth is required?

    A 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.

    Can this be used in bathrooms?

    The IP20 rating restricts the outlet to dry indoor locations. In bathrooms, it must be positioned outside splash zones — typically 600mm or more from taps, showerheads and bath edges — and must comply with BS 7671 wiring regulations for bathroom zones.

    Is the screwless plate removable for redecorating?

    Yes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the outlet and re-clipped without re-wiring.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.