Free Delivery on all orders over £99*

2 Gang 2 Way Intelligent Dimmer 10-200W (5-150W LED) - Brushed Brass Flat Plate

£3299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge FP2192BB is a 2-gang 2-way intelligent dimmer supporting 10-200W incandescent or halogen loads and 5-150W LED loads per gang. The brushed brass flat plate sits 2.5mm proud of the wall when fitted, with two rotary dimmer knobs that control lighting in two separate zones independently. Each knob pushes to turn the circuit on or off and rotates to adjust brightness from 5% to 100%.

Designed for residential installation where two lighting circuits need independent dimming control from a single wall position, the dimmer automatically detects load type and switches between trailing-edge mode (for LEDs and low-voltage halogens) and leading-edge mode (for resistive incandescent loads). Mode switching, trimming and resetting are all performed from the front plate using the control knobs, so there is no need to remove the faceplate to adjust settings when changing bulb types or load configurations.

The dimmer includes overload and overheat protection, shutting down the circuit if the load exceeds 200W per gang or if internal temperature rises above safe operating limits. An integrated Inrush Current Limiter (ICL) handles the brief high-current draw when switching on capacitive LED drivers, preventing nuisance tripping and extending the dimmer's operational life. The brushed brass finish carries a low-sheen satin texture that resists fingerprints and pairs well with warm-toned traditional and contemporary interiors.

This dimmer requires a 25mm minimum back box depth and uses screw terminals for live, switched live and neutral connections. The faceplate is fixed with two visible screws at the top and bottom edges. The dimmer is rated IP20 for dry indoor locations only and must not be used in bathrooms, kitchens within zones 1-2, or outdoor locations.

Specification
Height 87.5 mm
Width 87.5 mm
Projection 2.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Brushed Brass
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

Does this dimmer work with LED bulbs?

Yes. The dimmer supports 5-150W LED loads per gang and automatically switches between trailing-edge mode (for LEDs and electronic transformers) and leading-edge mode (for resistive loads). Use dimmable LED bulbs only, and avoid mixing brands or wattages within the same fitting.

How do I change the dimming mode?

Mode switching, trimming and resetting are all performed from the front plate using the control knobs. Press and hold the knob for several seconds to enter programming mode, then follow the procedure in the downloadable specification sheet above. There is no need to remove the faceplate.

Can both gangs control the same light?

No. This is a 2-gang 2-way dimmer, meaning it controls two separate lighting circuits independently. Each gang can be wired as part of a 2-way dimming circuit with a matching companion dimmer at another location, but the two gangs do not link to control the same load.

What back box depth is required?

A 25mm minimum back box depth is needed for safe installation. The faceplate adds 2.5mm projection from the wall once fitted, making this a low-profile option compared to deeper-plate dimmers.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge FP2192BB is a 2-gang 2-way intelligent dimmer supporting 10-200W incandescent or halogen loads and 5-150W LED loads per gang. The brushed brass flat plate sits 2.5mm proud of the wall when fitted, with two rotary dimmer knobs that control lighting in two separate zones independently. Each knob pushes to turn the circuit on or off and rotates to adjust brightness from 5% to 100%.

    Designed for residential installation where two lighting circuits need independent dimming control from a single wall position, the dimmer automatically detects load type and switches between trailing-edge mode (for LEDs and low-voltage halogens) and leading-edge mode (for resistive incandescent loads). Mode switching, trimming and resetting are all performed from the front plate using the control knobs, so there is no need to remove the faceplate to adjust settings when changing bulb types or load configurations.

    The dimmer includes overload and overheat protection, shutting down the circuit if the load exceeds 200W per gang or if internal temperature rises above safe operating limits. An integrated Inrush Current Limiter (ICL) handles the brief high-current draw when switching on capacitive LED drivers, preventing nuisance tripping and extending the dimmer's operational life. The brushed brass finish carries a low-sheen satin texture that resists fingerprints and pairs well with warm-toned traditional and contemporary interiors.

    This dimmer requires a 25mm minimum back box depth and uses screw terminals for live, switched live and neutral connections. The faceplate is fixed with two visible screws at the top and bottom edges. The dimmer is rated IP20 for dry indoor locations only and must not be used in bathrooms, kitchens within zones 1-2, or outdoor locations.

    Specification
    Height 87.5 mm
    Width 87.5 mm
    Projection 2.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Brushed Brass
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    Does this dimmer work with LED bulbs?

    Yes. The dimmer supports 5-150W LED loads per gang and automatically switches between trailing-edge mode (for LEDs and electronic transformers) and leading-edge mode (for resistive loads). Use dimmable LED bulbs only, and avoid mixing brands or wattages within the same fitting.

    How do I change the dimming mode?

    Mode switching, trimming and resetting are all performed from the front plate using the control knobs. Press and hold the knob for several seconds to enter programming mode, then follow the procedure in the downloadable specification sheet above. There is no need to remove the faceplate.

    Can both gangs control the same light?

    No. This is a 2-gang 2-way dimmer, meaning it controls two separate lighting circuits independently. Each gang can be wired as part of a 2-way dimming circuit with a matching companion dimmer at another location, but the two gangs do not link to control the same load.

    What back box depth is required?

    A 25mm minimum back box depth is needed for safe installation. The faceplate adds 2.5mm projection from the wall once fitted, making this a low-profile option compared to deeper-plate dimmers.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.