Free Delivery on all orders over £99*

14W Outdoor CCT LED Bulkhead With Microwave Sensor - IP65 White

£3399
The RRP is the manufacturer's recommended retail price of the item.
180 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge BT14ACTS is a 14W LED bulkhead with an integrated microwave sensor and adjustable colour temperature, rated IP65 for outdoor and bathroom use. The 315mm diameter white polycarbonate housing contains an SMD LED array behind an opal diffuser, delivering 1130-1260 lumens depending on the CCT setting selected. The colour temperature adjusts between 3000K warm white, 4000K neutral white and 5700K daylight via a switch on the LED gear tray.

Designed for wall or ceiling mounting on external walls, garage entrances, rear gardens, communal stairwells and bathroom ceilings where sensor control is needed. The microwave sensor detects movement through the polycarbonate housing with adjustable detection range, lux threshold and hold time, allowing the light to switch on only when motion is detected and ambient light falls below the set level. The hinged gear tray and push-fit terminal block allow access to wiring and sensor adjustments without removing the entire fitting from the wall.

The white polycarbonate construction combines impact resistance with UV stability for outdoor installation in exposed positions. The IP65 rating protects the internals against water jets from any direction, making the bulkhead suitable for soffit mounting under eaves, on external walls facing prevailing rain, or in bathrooms as ceiling lighting with sensor control. The Class II double-insulated construction requires no earth connection. The LED array carries a 50,000-hour L70B50 rating and a 5-year warranty.

Specification
Diameter 315 mm
Projection 74 mm
Construction Polycarbonate
Finish White
Class II
IP Rating IP65
Primary Voltage 230V 50Hz
Diffuser Opal
Lamp Technology SMD LED
Lamp Included Yes
Dimmable No
L70B50 50000
Energy Rating (Class) post 2021 SLR E
Beam Angle 115
CCT 3000/4000/5700 K
Light Colour CCT
Lumens 1130 / 1260 / 1210 lm
Lumens (Light Source only) 1340 lm
Wattage 14
Efficacy 109.9 lm/W
CRI >80
Driver Type Constant Current
Warranty 5
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

How do I change the colour temperature?

The CCT selector switch is located on the LED gear tray inside the bulkhead. After isolating the power, remove the diffuser by releasing the clips or screws, then slide the switch to choose between 3000K warm white, 4000K neutral white or 5700K daylight. Reassemble the diffuser and restore power.

How do I adjust the sensor settings?

The microwave sensor has three adjustable controls on the gear tray: detection range (how far the sensor reaches), lux threshold (the ambient light level below which the sensor activates) and hold time (how long the light stays on after detecting movement). Access the controls by removing the diffuser with the power isolated.

Can this be used in a bathroom?

Yes. The IP65 rating allows installation in bathroom zones 1 and 2 (above the bath or shower enclosure) as a ceiling-mounted light with sensor control. Ensure a suitable cable entry gland is used to maintain the IP rating.

What detection range does the microwave sensor offer?

The sensor typically detects movement within a 6-8m radius when set to maximum range, though this is adjustable. Microwave sensors detect through the polycarbonate housing and can sense movement through non-metallic walls, so positioning away from adjacent rooms or paths may be needed to avoid false triggering.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Built for outdoors

Weather-rated for outdoor use, so it stands up to the British climate.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge BT14ACTS is a 14W LED bulkhead with an integrated microwave sensor and adjustable colour temperature, rated IP65 for outdoor and bathroom use. The 315mm diameter white polycarbonate housing contains an SMD LED array behind an opal diffuser, delivering 1130-1260 lumens depending on the CCT setting selected. The colour temperature adjusts between 3000K warm white, 4000K neutral white and 5700K daylight via a switch on the LED gear tray.

    Designed for wall or ceiling mounting on external walls, garage entrances, rear gardens, communal stairwells and bathroom ceilings where sensor control is needed. The microwave sensor detects movement through the polycarbonate housing with adjustable detection range, lux threshold and hold time, allowing the light to switch on only when motion is detected and ambient light falls below the set level. The hinged gear tray and push-fit terminal block allow access to wiring and sensor adjustments without removing the entire fitting from the wall.

    The white polycarbonate construction combines impact resistance with UV stability for outdoor installation in exposed positions. The IP65 rating protects the internals against water jets from any direction, making the bulkhead suitable for soffit mounting under eaves, on external walls facing prevailing rain, or in bathrooms as ceiling lighting with sensor control. The Class II double-insulated construction requires no earth connection. The LED array carries a 50,000-hour L70B50 rating and a 5-year warranty.

    Specification
    Diameter 315 mm
    Projection 74 mm
    Construction Polycarbonate
    Finish White
    Class II
    IP Rating IP65
    Primary Voltage 230V 50Hz
    Diffuser Opal
    Lamp Technology SMD LED
    Lamp Included Yes
    Dimmable No
    L70B50 50000
    Energy Rating (Class) post 2021 SLR E
    Beam Angle 115
    CCT 3000/4000/5700 K
    Light Colour CCT
    Lumens 1130 / 1260 / 1210 lm
    Lumens (Light Source only) 1340 lm
    Wattage 14
    Efficacy 109.9 lm/W
    CRI >80
    Driver Type Constant Current
    Warranty 5
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    How do I change the colour temperature?

    The CCT selector switch is located on the LED gear tray inside the bulkhead. After isolating the power, remove the diffuser by releasing the clips or screws, then slide the switch to choose between 3000K warm white, 4000K neutral white or 5700K daylight. Reassemble the diffuser and restore power.

    How do I adjust the sensor settings?

    The microwave sensor has three adjustable controls on the gear tray: detection range (how far the sensor reaches), lux threshold (the ambient light level below which the sensor activates) and hold time (how long the light stays on after detecting movement). Access the controls by removing the diffuser with the power isolated.

    Can this be used in a bathroom?

    Yes. The IP65 rating allows installation in bathroom zones 1 and 2 (above the bath or shower enclosure) as a ceiling-mounted light with sensor control. Ensure a suitable cable entry gland is used to maintain the IP rating.

    What detection range does the microwave sensor offer?

    The sensor typically detects movement within a 6-8m radius when set to maximum range, though this is adjustable. Microwave sensors detect through the polycarbonate housing and can sense movement through non-metallic walls, so positioning away from adjacent rooms or paths may be needed to avoid false triggering.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.