LYYT 200 LED RGBA String Lights 10m - 24-Hour Auto-Timer, 8 Modes

The LYYT 200 LED RGBA string lights deliver multicolour illumination across a 10m lit length, with 200 concave LEDs spaced 50mm apart on dark green cable. The controller offers 8 pre-programmed sequences including waves, chasing, twinkle and steady-on, selectable via a button on the 31V DC mains adapter. An integrated 24-hour timer runs the lights for 8 hours on and 16 hours off when activated, removing the need for daily manual switching.

Designed for both indoor and sheltered outdoor installation, the string lights carry an IP44 rating along their lit length, allowing use under eaves, in covered patios, marquees, and gazebos where the cable is protected from direct rain. The controller unit is IP20 rated and must remain indoors or within a weatherproof enclosure. The 5m power lead from mains plug to first LED provides reach to distant outlets without needing extension cables in most residential and commercial settings.

The concave LED heads distribute light in a broader cone than traditional bullet-style LEDs, giving more even coverage when wrapped around bannisters, trees, or display structures. At 320g total weight across the 15m combined length, the string can be draped and looped without sagging excessively on temporary fixings. The RGBA colour mix cycles through red, green, blue and amber tones depending on the selected mode, with each LED capable of displaying the full spectrum.

The lights draw 3.6W maximum power consumption, equivalent to running costs of approximately £0.40 per year if operated for the full 8-hour daily timer cycle throughout the year at average UK electricity rates. The low-voltage 31V DC supply reduces risk compared to mains-voltage decorative lighting, and the LEDs generate minimal heat even after extended operation.

Can these be used fully outdoors?

The string lights carry an IP44 rating, which means they are protected against water splashes but not direct rain or full submersion. They suit sheltered outdoor areas such as covered patios, under eaves, inside gazebos and marquees. The controller unit is IP20 and must remain indoors or within a weatherproof box.

How does the timer function work?

Hold down the button on the mains adapter to activate the 24-hour timer. Once activated, the lights will run for 8 hours, then switch off automatically for 16 hours, repeating this cycle daily until the timer is deactivated or the lights are unplugged.

What are the 8 available modes?

The controller offers Combined, Waves, Sequential, Slow-Glow, Chasing, Slow-Fade, Twinkle, and Static (steady-on). Each mode is selected by pressing the button on the mains adapter, cycling through the sequence with each press.

Can multiple sets be linked together?

The specification does not indicate daisy-chain capability. Each set operates from its own 31V DC mains adapter, so multiple sets would require separate power outlets rather than connecting end-to-end.