Loop 2 Light Wall Light With Switch - Satin Nickel

The Loop is a 2-light wall light with two curved satin nickel arms extending from a circular backplate, each arm holding a frosted-clear glass globe with horizontal etched lines. An integrated rocker switch on the backplate allows the fitting to be turned on and off without a wall switch, making it practical for bedside positions, reading corners and lounge walls where local control is needed. Each globe houses a G9 bulb (sold separately).

Designed for bedrooms, living rooms and hallways, the Loop works as a pair flanking a bed headboard, as a single accent beside an armchair, or as corridor lighting where a wall switch is impractical or too far from the seating position. The 180mm projection from the wall gives enough clearance to direct light forward into the room rather than washing it straight down the wall. The 220mm width and 140mm height suit most standard wall heights without overwhelming narrow corridors or alcoves.

The satin nickel finish is a mid-tone brushed metal that sits between polished chrome and matt grey, pairing comfortably with both warm and cool-toned interiors. The frosted-clear glass globes diffuse the light from the G9 bulbs while the horizontal etched lines add visual texture when the light is on. The fitting is dimmable when paired with dimmable G9 LED bulbs and a compatible dimmer switch, allowing the light level to be adjusted for reading or ambient mood lighting.

Does the integrated switch control both lights together?

Yes. The rocker switch on the backplate turns both G9 bulbs on and off together. The fitting still requires connection to a mains supply via standard wall wiring, but the integrated switch means you do not need a separate wall switch to control it.

What bulbs does it take?

The Loop takes two G9 capsule bulbs (sold separately). G9 LEDs between 2W-5W and 2700K-3000K colour temperature are typical for bedside and reading use. The fitting supports up to the wattage specified by the G9 bulb manufacturer.

Can it be dimmed?

Yes, when paired with dimmable G9 LED bulbs and a compatible dimmer switch installed in the mains circuit. The integrated rocker switch on the fitting itself is not a dimmer. It only turns the light on or off.

What fixing is needed?

The backplate fixes to a standard wall with two screws (typically into a wall plug or directly into a stud). The fitting weighs 0.9kg and the electrical connection is made via a terminal block inside the backplate, requiring a qualified electrician to wire into the mains supply.