Description
This is the ATEX rated head torch in Energizer's working light line-up, and the certification is the reason to choose it over an ordinary lamp. The retail pack carries the markings I M1 and II 1G, which cover equipment certified for use in potentially explosive atmospheres, and the same pack states 130 lumens with a beam reaching 45m. The LED sits in a moulded orange and black head with a sealed lens ringed by corner screws, mounted on a wide strap with a textured non-slip band and a second strap over the crown. Universal helmet attachments are supplied in the box; batteries are not.
It is made for hands-free work in awkward places: inside plant compartments, under a vehicle, along a cable run, up a ladder, or out on site after dark. The clips let it ride on a helmet rather than a bare head, which matters when the rest of the kit is already in place, and the over-crown strap stops the weight creeping down as you move. The pack rates the body IP67, so it is sealed against dust ingress and against temporary immersion in water; rain, spray and a drop into a puddle are all within what that rating covers. The orange housing also makes it easy to find again in a dark van or a crowded tool bag.
Two modes are printed on the pack, along with a 6 hour runtime figure, so a full shift is a fair expectation from a fresh set of cells. Because batteries are not supplied, add cells to your order at the same time if you do not keep spares in the workshop. Energizer does not print a colour temperature for this model. It is sold as one head torch with a minimum order of one, and it sits alongside our wider range of Energizer head torches, including rechargeable and hybrid models.
Specification
| Light source |
LED |
| Brightness |
130 lumens, as stated on the pack |
| Colour temperature |
Not stated by the manufacturer |
| Runtime |
6 hours, as stated on the pack |
| Battery |
Not included; cell size not stated by the manufacturer |
| IP rating |
IP67, as stated on the pack |
| Sold as |
1 head torch with universal helmet attachments |
| Minimum order |
1, sold in multiples of 1 |
Frequently Asked
Are batteries included, and what size does it take?
No cells are supplied with this one, so order batteries at the same time. The manufacturer does not state the cell size or quantity, so check the battery compartment before buying replacements.
How bright is it and how far does the beam reach?
The pack states 130 lumens and a beam reaching 45m. That is comfortable output for close hand work, with enough throw to pick out a valve, a label or a step some distance ahead.
Can it be worn on a safety helmet?
Yes. Universal helmet attachments are supplied in the box, so the lamp can be clipped to a helmet instead of sitting on a bare head or over a hood.
What does the IP67 rating actually cover?
The pack rates it IP67, meaning the housing is sealed against dust and will withstand temporary immersion in water. Rain, hose spray and an accidental drop into standing water are all covered.
What do the ATEX markings on the pack mean?
The pack carries I M1 and II 1G, the equipment group and category markings for certified use in potentially explosive atmospheres. Check the classification your own site requires before issuing it.
How many modes does it have and how long will it run?
Two modes are printed on the pack, with a 6 hour runtime figure. Actual runtime will depend on the mode you use and the cells you fit.