Elyssar Rectangle Wall Mirror - Silver

The Elyssar is a 92x66cm rectangle wall mirror surrounded by a moulded plastic frame finished in silver with a continuous acanthus leaf relief pattern running around all four edges. The frame depth of 3.5cm gives the mirror a substantial profile without protruding far from the wall, and the 8kg total weight requires secure wall fixings rated for the load.

Designed as a full-length wall mirror, the Elyssar suits bedrooms, dressing areas, hallway entrances and bathroom settings where its vertical proportions support outfit checking and grooming. The 92cm height provides head-to-waist coverage when hung at typical adult eye level, or near-full-body reflection when mounted lower on the wall. The silver finish on the frame reflects ambient light, adding brightness to narrow hallways and smaller bedrooms where natural light is limited.

The plastic frame is moulded with a repeating acanthus scroll pattern that gives the appearance of carved wood or plasterwork but at a lower weight than solid timber or resin alternatives. The silver coating is applied over the moulded surface and sits midway between polished chrome and brushed silver in reflectivity, pairing comfortably with both warm-toned and cool-toned interiors. The 66cm width fits standard wall spaces above console tables, between alcoves, and in typical bedroom wall segments without overwhelming the surrounding furniture.

What fixings are needed to hang this mirror?

The mirror weighs 8kg, so it requires wall plugs and screws rated for at least 10kg load, or equivalent cavity fixings if mounting on stud walls. Britannia Mirrors typically provide D-rings or keyhole fixings on the rear — check the back of the frame before installation.

Can this be used in a bathroom?

The plastic frame is moisture-resistant, but the mirror itself is standard glass without special sealing. It can be used in bathrooms with adequate ventilation, but avoid mounting directly above baths or showers where constant steam exposure may degrade the silvering on the mirror glass over time.

How is the silver finish maintained?

Wipe the frame with a dry or barely-damp microfibre cloth. For the mirror glass, use standard glass cleaner and avoid spraying directly onto the frame to prevent cleaner pooling in the relief detail. Do not use abrasive cloths or chemical polishes on the silver coating.

Is this mirror suitable for leaning against a wall rather than hanging?

The 92cm height and 8kg weight make it stable enough to lean against a wall on a flat floor, but the 3.5cm frame depth means it sits at a slight angle when leaned. For full-body reflection when leaning, position it on a carpet or rug to prevent slipping.