Description
The Dynamite is a compact adjustable spot on a square 57mm base, made for aiming light rather than filling a room. The head tilts and turns within the frame, so a single fitting can be pointed straight down a wall, angled onto a picture or swung to graze a shelf. Lit, it throws one clean directed beam; off, the small squared body sits flush and low against the surface, in a crisp white finish.
Because it mounts on either a wall or a ceiling, one spot can pick out artwork, a reading nook or a run of shelving wherever the mains point sits. Its 141mm reach holds the head clear so the beam can be swung without fouling, which makes it useful in a hallway, an alcove or over a worktop. The square base gives a more architectural look than a round spot where that suits the room.
The frame is powder-coated metal and the fitting is rated IP20 for dry indoor rooms. It takes one GU10 lamp, supplied with the spot, so it arrives ready to use, and the replaceable cap lets you change brightness or beam later by swapping the bulb.
Specification
| Number of lights |
1 |
| Light source |
1 x GU10 (max 28W, bulb included) |
| Colour temperature |
Depends on bulb fitted |
| Width |
57mm (square) |
| Height |
57mm |
| Projection |
141mm |
| IP rating |
IP20 |
| Dimmable |
No (dimmable with a dimmable GU10 bulb) |
| Adjustment |
Head tilts and rotates |
| Frame / Structure finish |
White metal |
| Materials |
Powder-coated metal frame |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Dynamite give?
One directed beam you can aim. The head tilts and rotates within the square frame, so the single GU10 spot can be pointed at a picture, a shelf or a work surface rather than washing the whole room.
Does it come with a bulb?
Yes. It is supplied with one GU10 lamp, so it works from the moment it is wired. The GU10 cap is replaceable, which lets you swap it later to change the brightness, beam angle or colour tone.
Can it be dimmed?
There is no dimmer built in, but because it runs a standard GU10 you can dim it by fitting a dimmable GU10 lamp on a compatible wall dimmer.
Can I fix it to the ceiling as well as the wall?
Yes. The Dynamite mounts on either a wall or a ceiling, so the same square spot works as a wall-mounted accent or a ceiling-mounted downward beam over a worktop or reading spot.