Description
The Dynamite is a twin adjustable spot on a compact 165mm base, carrying two GU10 heads that each tilt and turn on their own. Because both aim independently, one fitting can throw two separate beams: both down a wall, one onto a picture and one onto a shelf, or a pair spread across a worktop. Lit, it gives two directed pools of light; off, the low matt black body reads as a small neat bar against the surface.
It fixes to either a wall or a ceiling, so the same piece can wash a stretch of artwork from above or pick out two points across an alcove or reading corner. With a 141mm reach the heads stand clear of the surface and swing freely, which makes the twin useful over a worktop, along a hallway or beside a bed where a single spot would not cover both spots wanted.
The frame is powder-coated metal and the fitting is rated IP20 for dry indoor rooms. It takes two GU10 lamps, supplied with it, so it arrives ready to use, and the replaceable caps let you change brightness or beam later by swapping the bulbs.
Specification
| Number of lights |
2 |
| Light source |
2 x GU10 (max 28W each, bulbs included) |
| Colour temperature |
Depends on bulb fitted |
| Width |
165mm |
| Height |
57mm |
| Projection |
141mm |
| IP rating |
IP20 |
| Dimmable |
No (dimmable with dimmable GU10 bulbs) |
| Adjustment |
Each head tilts and rotates |
| Frame / Structure finish |
Matt black metal |
| Materials |
Powder-coated metal frame |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Dynamite give?
Two directed beams you can aim separately. Each GU10 head tilts and rotates on its own, so the pair can point at two pictures, light a shelf and a worktop, or both wash down a wall rather than filling the room evenly.
Does it come with bulbs?
Yes. It is supplied with two GU10 lamps, so it works from the moment it is wired. The GU10 caps are replaceable, which lets you swap them later to change the brightness, beam angle or colour tone.
Can it be dimmed?
There is no dimmer built in, but because it runs standard GU10 lamps you can dim it by fitting dimmable GU10 bulbs on a compatible wall dimmer.
Can I fix it to the ceiling as well as the wall?
Yes. The Dynamite mounts on either a wall or a ceiling, so the twin works as a wall accent picking out two points or as a ceiling fitting throwing two beams down onto a surface below.