Description
We stock the Basis in white as a linear LED pendant light for hanging over a desk, worktop or island. It is a slim aluminium profile finished in white powder coat, with an integrated 36W LED strip that runs the full length of the body and casts an even downward light. With a wide 100 degree beam and a 90 CRI rating, it gives natural, true-to-life colour across the surface below.
We think it suits workspaces and open-plan rooms where you want steady, uniform light for a task. It works well over long kitchen islands, meeting tables and studio desks, and the 90 CRI output keeps colours accurate for jobs where that matters, such as home offices and design work. The white finish sits quietly against white or light-toned ceilings, so the fitting stays understated in the room.
The LED is dimmable, so you can take the light from full brightness down to a soft glow to suit the time of day, and it works with most trailing-edge and leading-edge dimmers (sold separately). The driver is integrated into the body and runs on 220-240V AC mains, so installation needs only a mains connection. The aluminium body helps the fitting shed heat, and it carries an IP20 rating for use in dry indoor rooms.
Specification
| Wattage |
36 W |
| IP Rating |
IP 20 |
| Beam Angle |
100° |
| CRI |
90 CRI |
| Voltage |
50Hz AC 220-240 V |
| Dimmable |
Yes |
| Material |
Aluminium |
| Finish |
White |
| Energy Class |
G |
Downloads
Product datasheet
Frequently Asked
Is it dimmable?
Yes. The integrated 36W LED dims on a compatible trailing-edge or leading-edge dimmer (sold separately), so you can set it from full brightness down to a soft glow.
What sort of light does it give?
It gives an even, downward wash from a full-length LED strip, with a wide 100 degree beam and a 90 CRI rating for accurate, natural colour across the surface below.
Where can I fit it?
It is rated IP20 for dry indoor rooms, so it is well suited to over a desk, kitchen island, worktop or meeting table rather than bathrooms or outdoor spaces.
Do I need to buy bulbs?
No. The LED is built in, and the driver is integrated into the body and runs on 220-240V AC mains, so installation needs only a mains connection.