Free Delivery on all orders over £99*

24V DC Plug-In Power Connector for LED Linkable Flat Striplights

£499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge LEDTD2 is a 24V DC plug-in power connector designed to feed mains power into Knightsbridge LED linkable flat striplight systems. The connector accepts a 24V DC input from a compatible driver or transformer and transfers that power to the striplight via a two-pin plug fitting that clips directly into the end of the strip.

The connector is rated to a maximum load of 36W, which supports typical single-run installations of Knightsbridge flat striplights up to approximately 3 metres depending on the specific striplight wattage per metre. The IP20 rating confines use to dry indoor locations such as under-cabinet lighting in kitchens, wardrobe interiors, shelving, and display cases where the connector body will not be exposed to moisture or direct contact with dust.

The black plastic housing measures 41mm long by 33mm wide with an 8mm projection from the mounting surface, keeping the connector compact enough to fit inside cabinet plinths and shelf recesses. The Class III rating indicates the connector operates at extra-low voltage (24V DC), requiring no earth connection and posing minimal shock risk when paired with a suitable isolated driver.

Specification
Length 41 mm
Width 33 mm
Projection 8 mm
Finish Black
Class III
IP Rating IP20
Primary Voltage 24V DC
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What striplight systems is this connector compatible with?

The LEDTD2 is designed for use with Knightsbridge LED linkable flat striplights that operate on 24V DC. It is not compatible with mains-voltage striplights or other manufacturers' systems unless they share the same two-pin connector specification.

What is the maximum striplight length this connector can power?

The connector is rated to 36W maximum. Typical Knightsbridge flat striplights run at 10-14W per metre, so a single connector supports approximately 2.5-3.5 metres of striplight depending on the specific product. Exceeding 36W will overload the connector.

Can this be used in bathrooms or outdoors?

No. The IP20 rating means the connector offers no protection against moisture or solid ingress beyond fingers and large objects. It must be used in dry indoor locations only, away from direct contact with water or excessive dust.

Does the connector include the 24V DC driver?

No. The connector transfers power from a driver to the striplight, but the driver itself is sold separately. You will need a compatible 24V DC LED driver rated to match the total wattage of your striplight installation.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge LEDTD2 is a 24V DC plug-in power connector designed to feed mains power into Knightsbridge LED linkable flat striplight systems. The connector accepts a 24V DC input from a compatible driver or transformer and transfers that power to the striplight via a two-pin plug fitting that clips directly into the end of the strip.

    The connector is rated to a maximum load of 36W, which supports typical single-run installations of Knightsbridge flat striplights up to approximately 3 metres depending on the specific striplight wattage per metre. The IP20 rating confines use to dry indoor locations such as under-cabinet lighting in kitchens, wardrobe interiors, shelving, and display cases where the connector body will not be exposed to moisture or direct contact with dust.

    The black plastic housing measures 41mm long by 33mm wide with an 8mm projection from the mounting surface, keeping the connector compact enough to fit inside cabinet plinths and shelf recesses. The Class III rating indicates the connector operates at extra-low voltage (24V DC), requiring no earth connection and posing minimal shock risk when paired with a suitable isolated driver.

    Specification
    Length 41 mm
    Width 33 mm
    Projection 8 mm
    Finish Black
    Class III
    IP Rating IP20
    Primary Voltage 24V DC
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What striplight systems is this connector compatible with?

    The LEDTD2 is designed for use with Knightsbridge LED linkable flat striplights that operate on 24V DC. It is not compatible with mains-voltage striplights or other manufacturers' systems unless they share the same two-pin connector specification.

    What is the maximum striplight length this connector can power?

    The connector is rated to 36W maximum. Typical Knightsbridge flat striplights run at 10-14W per metre, so a single connector supports approximately 2.5-3.5 metres of striplight depending on the specific product. Exceeding 36W will overload the connector.

    Can this be used in bathrooms or outdoors?

    No. The IP20 rating means the connector offers no protection against moisture or solid ingress beyond fingers and large objects. It must be used in dry indoor locations only, away from direct contact with water or excessive dust.

    Does the connector include the 24V DC driver?

    No. The connector transfers power from a driver to the striplight, but the driver itself is sold separately. You will need a compatible 24V DC LED driver rated to match the total wattage of your striplight installation.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.