Free Delivery on all orders over £99*

50W Quick Connect GU10 Downlight - White

£1599
The RRP is the manufacturer's recommended retail price of the item.
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This is a recessed GU10 downlight fitting with a white round bezel, a die-cast aluminium build and a rated wattage of 50W. The bezel sits against the ceiling and the black body behind it carries the GU10 lamp holder, with two sprung clips on the sides that grip the ceiling board once the fitting has been pushed up through the hole. A quick connect terminal block is mounted on a bracket at the rear, which is where the mains feed lands. The manufacturer states the fitting as dimmable. It is fire rated for 30, 60 and 90 minutes.

Downlights like this go into kitchen, hallway, landing, living room and bedroom ceilings, usually in a run of three or four spaced evenly along the room or in a line above a worktop. The bezel is fixed rather than tilting, so the light falls straight down, which suits general ceiling lighting and even coverage more than picking out a picture or a wall. White is the finish to pick when you want the fitting to read as part of a painted ceiling rather than as hardware. We also list the same fitting in chrome, and tilted versions in white and chrome if you would rather angle the beam.

The 50W figure is the ceiling the fitting is rated to rather than a target, and a GU10 LED lamp will draw a small fraction of it. Brightness, colour temperature and beam angle all come from the lamp you choose, so buy the lamp on the light you want. The fitting is stated as dimmable, so the pairing that decides how smoothly it dims is a GU10 marked dimmable together with a dimmer rated for LED loads. It runs on a 220-240V mains supply. One unit is one fitting, with a minimum order of one, so you can order the exact number a room needs.

Specification
Type Recessed downlight
Lamp fitting GU10
Wattage 50W
Finish White
Material Die-cast aluminium
Dimmable Yes
Sold as 1 fitting
Minimum order 1, sold in multiples of 1
IP Rating IP65 (front)
Cut-out 72mm
Minimum ceiling void 122mm
Fire rating 30, 60 and 90 minutes
Frequently Asked

Which lamps does this fitting take?

It takes a GU10 lamp, the twist and lock cap with two stubby pins, up to the rated 50W. Any GU10 will fit mechanically, so choose on brightness and colour temperature.

Will it dim?

The manufacturer states the fitting as dimmable. Because the light itself comes from the lamp, fit a GU10 marked dimmable and use a dimmer rated for LED loads.

What size hole does it need?

It needs a 72mm cut-out and at least 122mm of ceiling void. If you are replacing an existing downlight, measure the hole in your ceiling before you order.

What does quick connect mean here?

A terminal block is fitted to the bracket at the back, so the mains feed is terminated at the fitting itself. Wiring should be carried out by a competent person.

Is a lamp supplied with it?

This listing is one fitting and the manufacturer does not list a lamp as part of it, so plan on buying a GU10 lamp for each fitting.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard GU10 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This is a recessed GU10 downlight fitting with a white round bezel, a die-cast aluminium build and a rated wattage of 50W. The bezel sits against the ceiling and the black body behind it carries the GU10 lamp holder, with two sprung clips on the sides that grip the ceiling board once the fitting has been pushed up through the hole. A quick connect terminal block is mounted on a bracket at the rear, which is where the mains feed lands. The manufacturer states the fitting as dimmable. It is fire rated for 30, 60 and 90 minutes.

    Downlights like this go into kitchen, hallway, landing, living room and bedroom ceilings, usually in a run of three or four spaced evenly along the room or in a line above a worktop. The bezel is fixed rather than tilting, so the light falls straight down, which suits general ceiling lighting and even coverage more than picking out a picture or a wall. White is the finish to pick when you want the fitting to read as part of a painted ceiling rather than as hardware. We also list the same fitting in chrome, and tilted versions in white and chrome if you would rather angle the beam.

    The 50W figure is the ceiling the fitting is rated to rather than a target, and a GU10 LED lamp will draw a small fraction of it. Brightness, colour temperature and beam angle all come from the lamp you choose, so buy the lamp on the light you want. The fitting is stated as dimmable, so the pairing that decides how smoothly it dims is a GU10 marked dimmable together with a dimmer rated for LED loads. It runs on a 220-240V mains supply. One unit is one fitting, with a minimum order of one, so you can order the exact number a room needs.

    Specification
    Type Recessed downlight
    Lamp fitting GU10
    Wattage 50W
    Finish White
    Material Die-cast aluminium
    Dimmable Yes
    Sold as 1 fitting
    Minimum order 1, sold in multiples of 1
    IP Rating IP65 (front)
    Cut-out 72mm
    Minimum ceiling void 122mm
    Fire rating 30, 60 and 90 minutes
    Frequently Asked

    Which lamps does this fitting take?

    It takes a GU10 lamp, the twist and lock cap with two stubby pins, up to the rated 50W. Any GU10 will fit mechanically, so choose on brightness and colour temperature.

    Will it dim?

    The manufacturer states the fitting as dimmable. Because the light itself comes from the lamp, fit a GU10 marked dimmable and use a dimmer rated for LED loads.

    What size hole does it need?

    It needs a 72mm cut-out and at least 122mm of ceiling void. If you are replacing an existing downlight, measure the hole in your ceiling before you order.

    What does quick connect mean here?

    A terminal block is fitted to the bracket at the back, so the mains feed is terminated at the fitting itself. Wiring should be carried out by a competent person.

    Is a lamp supplied with it?

    This listing is one fitting and the manufacturer does not list a lamp as part of it, so plan on buying a GU10 lamp for each fitting.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.