Free Delivery on all orders over £99*
Save 30%

Zephyra Outdoor LED Square Recessed Ground Light - 14W 3000K Grey

£36599
RRP £52200
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Zephyra is a 250mm square recessed ground light housing a single 14W LED module that tilts ±30° to direct warm 3000K light onto pathways, facades or garden features. The fitting sits flush with the ground surface once installed, with only the grey steel bezel and the two louvred light apertures visible above ground level. The IP67 rating seals the housing against dust and temporary water immersion, making it suitable for driveways, pedestrian zones and areas where surface water may pool during heavy rain.

Designed for permanent outdoor installation in concrete, paving or gravel surfaces, the Zephyra requires a recessed cavity 235mm deep to house the driver and wiring compartment below ground. The tiltable module allows the beam to be angled during installation to graze a wall, illuminate a step edge, or wash light across a planting bed without needing to relocate the fitting. The 14W output provides enough intensity to mark pathway edges at 3-5m spacing or to uplight a building facade from 1-2m distance.

The grey powder-coated steel construction resists corrosion in coastal and urban environments. The 3000K colour temperature produces a warm white light that complements natural stone, brick and timber finishes without the cold blue cast of higher Kelvin LEDs. The square 250mm footprint integrates visually with modern paving grids and architectural hard-landscaping schemes. The 400mm tail cable connects to external-grade wiring buried in conduit, with the driver housed inside the fitting's below-ground compartment.

Specification
Length (mm) 250
Projection (mm) 235
Cable Length (mm) 400
Dimmable No
Number Of Bulbs 1
Bulb Type LED
Colour Temperature 3000K
IP Rating IP67
Warranty 5 Years
Frequently Asked

What does the IP67 rating mean for installation?

IP67 provides complete dust sealing and protects against temporary water immersion up to 1m depth for 30 minutes. The Zephyra can be installed in driveways, pedestrian zones and areas where surface water may pool, but it is not designed for permanent underwater use or installation in ponds.

How deep does the installation cavity need to be?

The fitting requires a 235mm-deep recessed cavity below the finished surface level to house the driver and wiring compartment. The steel bezel then sits flush with the paving, concrete or gravel surface once installed.

Can the light direction be adjusted after installation?

The LED module tilts ±30° on installation to direct the beam onto a wall, step edge or planting bed. Once the surface is reinstated around the bezel, adjusting the tilt requires excavating around the fitting to access the module again, so final aiming should be confirmed before backfilling.

What spacing is recommended for pathway lighting?

For pathway edge marking, typical spacing is 3-5m between fittings depending on the beam angle and desired light level. For facade uplighting or feature illumination, position the Zephyra 1-2m from the target surface and angle the module to direct the beam upwards.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Zephyra is a 250mm square recessed ground light housing a single 14W LED module that tilts ±30° to direct warm 3000K light onto pathways, facades or garden features. The fitting sits flush with the ground surface once installed, with only the grey steel bezel and the two louvred light apertures visible above ground level. The IP67 rating seals the housing against dust and temporary water immersion, making it suitable for driveways, pedestrian zones and areas where surface water may pool during heavy rain.

    Designed for permanent outdoor installation in concrete, paving or gravel surfaces, the Zephyra requires a recessed cavity 235mm deep to house the driver and wiring compartment below ground. The tiltable module allows the beam to be angled during installation to graze a wall, illuminate a step edge, or wash light across a planting bed without needing to relocate the fitting. The 14W output provides enough intensity to mark pathway edges at 3-5m spacing or to uplight a building facade from 1-2m distance.

    The grey powder-coated steel construction resists corrosion in coastal and urban environments. The 3000K colour temperature produces a warm white light that complements natural stone, brick and timber finishes without the cold blue cast of higher Kelvin LEDs. The square 250mm footprint integrates visually with modern paving grids and architectural hard-landscaping schemes. The 400mm tail cable connects to external-grade wiring buried in conduit, with the driver housed inside the fitting's below-ground compartment.

    Specification
    Length (mm) 250
    Projection (mm) 235
    Cable Length (mm) 400
    Dimmable No
    Number Of Bulbs 1
    Bulb Type LED
    Colour Temperature 3000K
    IP Rating IP67
    Warranty 5 Years
    Frequently Asked

    What does the IP67 rating mean for installation?

    IP67 provides complete dust sealing and protects against temporary water immersion up to 1m depth for 30 minutes. The Zephyra can be installed in driveways, pedestrian zones and areas where surface water may pool, but it is not designed for permanent underwater use or installation in ponds.

    How deep does the installation cavity need to be?

    The fitting requires a 235mm-deep recessed cavity below the finished surface level to house the driver and wiring compartment. The steel bezel then sits flush with the paving, concrete or gravel surface once installed.

    Can the light direction be adjusted after installation?

    The LED module tilts ±30° on installation to direct the beam onto a wall, step edge or planting bed. Once the surface is reinstated around the bezel, adjusting the tilt requires excavating around the fitting to access the module again, so final aiming should be confirmed before backfilling.

    What spacing is recommended for pathway lighting?

    For pathway edge marking, typical spacing is 3-5m between fittings depending on the beam angle and desired light level. For facade uplighting or feature illumination, position the Zephyra 1-2m from the target surface and angle the module to direct the beam upwards.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.