Zephyra LED Square Recessed Ground Light - 6W 3000K Silver IP67

The Zephyra is a 162mm square recessed ground light with an integrated 6W LED rated at 3000K, set within a steel body with a silver powder-coated finish. The fitting sits flush with ground level once installed, with only the frosted glass lens visible above the surface, casting a diffused upward wash of warm white light across adjacent surfaces.

Designed for pathway edging, patio perimeters, driveway borders and garden feature lighting, the Zephyra requires a recessed housing pit approximately 170mm deep to accommodate the body and the 400mm cable tail that connects to external mains wiring. The IP67 rating provides full protection against dust ingress and temporary immersion in water up to 1m depth, making the fitting suitable for locations where standing water may collect during heavy rain or where regular hosing down occurs.

The steel housing resists corrosion in outdoor conditions and the powder-coated silver finish reflects ambient daylight without standing out visually when the fitting is not lit. The non-dimmable LED delivers consistent output without requiring bulb replacement, and the frosted glass lens diffuses the beam to prevent harsh glare when viewed from standing height. The 6W output provides functional visibility lighting rather than high-intensity accent lighting, making the Zephyra appropriate for continuous runs along pathways where multiple fittings create evenly-spaced markers.

What depth of recess is required for installation?

The fitting body projects 170mm below ground level, so the recessed housing pit needs to be at least 170mm deep plus additional depth for cable connection and drainage provision. The 400mm cable tail exits from the base of the body.

Can this be driven over or walked on?

The Zephyra is rated IP67 for water and dust ingress but is not specified as a drive-over fitting. It is designed for pathway edging, patio perimeters and garden borders where it will receive foot traffic but not vehicle loads. For driveway installation where vehicles may cross the fitting, check with the manufacturer or choose a drive-over rated ground light.

Is the LED replaceable?

No. The LED is integrated into the fitting and is not user-replaceable. The LED is rated for long operational life and is covered under the 5-year manufacturer warranty.

How is the fitting cleaned?

The frosted glass lens can be wiped with a damp cloth to remove dirt, pollen and garden debris. The silver steel body can be hosed down or wiped clean. Avoid abrasive cleaners that may scratch the powder-coated finish.