Description
A compact cylinder just 50mm across, this little spot puts out a tight, directional pool of warm white light rather than a general wash. The integrated LED draws 7W and reads at 3000K, so the tone stays soft against white paint and warm timber. The beam is narrow and controlled, which makes it useful where you want a single object lit and the surrounding wall left alone. A driver is supplied with it. It is not a dimming fitting, so it runs at a fixed output whenever the circuit is switched on.
It is one we suggest for accenting rather than lighting a whole room: a picture, a run of shelves, a plant in a corner, the back of an alcove. In kitchens it works well aimed at a worktop or a splashback, and in a hallway it can pick out a framed print and leave the rest quiet. The warm tone suits living rooms and bedrooms, where cooler light can feel clinical. Because the output is fixed, we would pair it with other switched circuits if you want the room to shift through the evening.
The finish is a sand white, a fine matt texture that scatters reflections and sits back against a pale ceiling instead of catching the eye. Keep it clean by switching the circuit off, letting the body lose its heat, then running a dry microfibre cloth over the outside; nothing wet near the front aperture, and no solvent cleaners on the finish. It carries a three year warranty. We stock the same body in sand black and sand gold, and the sand white in a shorter version, if you are mixing lengths across a run.
Specification
| Colour |
Sand White |
| Weight |
0.21KG |
| Diameter |
50mm |
| Height |
110mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
30000hrs |
| LED Brand |
OSRAM1202 |
| Qty of SMD |
1 |
| LED Power |
7W (±5%) |
| LED Voltage |
36V (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle |
24º |
| System Flux |
560lm (±5%) |
| CRI |
>90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Constant Voltage Output |
48V |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
200-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it actually give?
It produces 560 lumens from a 7W integrated LED, at a warm white 3000K. That is accent light for a defined target, not enough on its own to light a whole room.
Can I put it on a dimmer?
No. It is a non-dimmable fitting and should be run from a plain switched circuit at its fixed output.
What are the dimensions?
The body is 50mm in diameter and 110mm tall, and it weighs 0.21kg.
Do I need to buy a bulb or a driver?
Neither. The LED is integrated and the driver comes with the fitting, so there is nothing further to order.
How true are colours under it?
Colour rendering is above 90, so fabrics, artwork and food read close to their proper colour rather than looking washed out.
Is it suitable for a bathroom or an outside wall?
No. It is rated IP20 and belongs in dry, sheltered rooms such as living areas, bedrooms, halls and kitchens away from splashes.