Description
A single narrow spotlight with a slim cylindrical body in a soft sand gold, this one throws a tight, controlled beam rather than a broad wash. The LED is built in and draws 7W, giving 560 lumens of warm white light with strong colour rendering, so timber, paint and fabric all read true under it. The driver is supplied with the fitting. It is not a dimming light, so it belongs on a circuit where full output is what you are after.
We reach for a small spot like this where light needs to land on something in particular: a painting, a run of open shelving, a worktop, a group of glass or ceramics. At around 11cm tall the body stays discreet enough to sit in a line of several without crowding the ceiling, and the warm tone keeps living rooms, hallways and dining spaces comfortable rather than clinical. Think dry, heated interiors; a sitting room or kitchen suits it, an open porch or a shower area does not.
The sand gold is a matt, lightly grained gold rather than a bright polish, which keeps glare off the body when the fitting sits in your eyeline. Wipe the outside occasionally with a dry cloth, and if the lens gathers dust a soft brush is kinder to it than anything damp. Switch the circuit off and let the head cool before you go near it. It carries a three year warranty. We stock the same body in sand black and sand white, and the range runs to a shorter head in this diameter plus a slimmer, lower output version for tighter groupings, so a full scheme can be kept in one family across a whole floor. As the LED is integrated, there is no lamp to buy or change.
Specification
| Colour |
Sand Gold |
| Weight |
0.21KG |
| Diameter |
50mm |
| Height |
110mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
30000hrs |
| LED Brand |
OSRAM1202 |
| Qty of SMD |
1 |
| LED Power |
7W (±5%) |
| LED Voltage |
36V (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle |
24º |
| System Flux |
560lm (±5%) |
| CRI |
>90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Constant Voltage Output |
48V |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
200-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give?
560 lumens at 3000K warm white, from a 7W integrated LED with a CRI above 90 for accurate colour.
Can I put it on a dimmer switch?
No. It is a non-dimmable fitting and should be run from a standard switched circuit.
How big is it?
The body is 50mm in diameter and 110mm tall, and it weighs a little over 0.2kg.
Is a driver needed separately?
No, the driver is included with the fitting.
What happens when the LED reaches the end of its life?
The LED is integral and rated at 30,000 hours, so the head is replaced as a unit rather than re-lamped.
Is it suitable for a bathroom?
No. It is rated IP20 and should be kept to dry indoor rooms.